Getting Started - THOMSON 20LB120S4 Instructions For Use Manual

3. GETTING STARTED

Switching on
Follow the instructions on this page on how to switch on your TV set and the remote control before going on to following
pages describing how to use the remote control and the channel set-up procedure.
220-240 V~50 Hz
Mains socket in uk
Connect the female plug to the AC socket on AC
1.
adaptor.
Connect the AC adaptor to the DC power input of
2.
the set.
Connect the male plug to the wall outlet as
3.
illustrated.
Equipment for the UK is supplied with a mains cable fitted with a
Mains socket in
moulded plug.
Continental Europe
This plug contains safety components and must not be replaced by
one sold by general retailers. It is fitted with a fuse that protects your
television.
If your set has stopped working, the fuse may have blown. If it has,
replace it with an identical ASTA or BSI certified (BS1362) 5-amp fuse.
4. Connect the outside aeri
socket at the back of the TV set.
The aerial socket (75 Ohms - VHF / UHF / cable) can be used for
connecting an external aerial or other equipment fitted with a
modulator (video recorder, satellite receiver, etc.).
We recommend that you do not connect other equipment (video
recorder, satellite receiver, etc.) to your TV set to begin with, so as not
to complicate the set-up procedure with the additional steps involved.
Connect them when you have finished setting up the channels by
referring to page 20 of this manual.
5. Switch the TV on by pressing the on/off button on the right
side.
You will find a description of how to use the remote control on page 9.
Then go to page 11 for information on the initial set-up, or to page13
for information on manual set-up (if the channels have already been
set up on your TV).
8
or cable network to the
al