Cleaning the air filter element
The air filter element should be cleaned
as follows at the intervals specified in
the periodic maintenance and lubrica-
tion chart. Clean or, if necessary, re-
place the air filter element more
frequently if you are riding in unusually
wet or dusty areas.
To clean the air filter element
1. Remove the air filter case cover by
removing the screws.
1. Screw
2. Air filter case cover
2. Pull the sponge material and the
air filter mesh out.
PERIODIC MAINTENANCE AND ADJUSTMENT
EAU39834
1. Sponge material
1. Air filter mesh
3. Clean the mesh with solvent, and
then wipe the solvent off.
4. Clean the sponge material with
solvent, and then squeeze the re-
maining solvent out. WARNING!
Use only a dedicated parts
cleaning solvent. To avoid the
5. Apply oil of the recommended type
TIP
The sponge material should be wet but
not dripping.
6-8
risk of fire or explosion, do not
use gasoline or solvents with a
low flash point.
[EWA10431]
To avoid damaging the foam
material, handle it gently and
carefully, and do not twist or
wring it.
[ECA10511]
to the entire surface of the sponge
material, and then squeeze the ex-
cess oil out.
Recommended oil:
Yamaha foam air filter oil or other
quality foam air filter oil
NOTICE:
6