Residual Risks - Black & Decker BHSMP2008 Manual

ENGLISH
Regularly check the power lead for
u
damage.
Do not use the appliance if any part is
u
damaged or defective.
Have any damaged or defective parts
u
repaired or replaced by an authorized
repair agent.
Never attempt to remove or replace
u
any parts other than those specified in
this manual.

Residual risks

Additional residual risks may arise when
using the tool which may not be included
in the enclosed safety warnings. These
risks can arise from misuse, prolonged
use etc. Even with the application of the
relevant safety regulations and the
implementation of safety devices, certain
residual risks can not be avoided. These
include:
Injuries caused by touching any
u
moving parts.
Injuries caused by touching any hot
u
parts.
Injuries caused when changing any
u
parts or accessories.
Injuries caused by prolonged use
u
of the appliance. When using any
appliance for prolonged periods
ensure you take regular breaks.
Electrical safety
@
Warning! This product must be
earthed.
Always check that the power
supply corresponds to the volt-
age on the rating plate.
8
(Original instructions)
Power plugs must match the outlet.
Never modify the plug in any way.
Unmodified plugs and matching outlets
will reduce risk of electric shock.
If the supply cord is damaged, it must
u
be replaced by the manufacturer or an
authorised BLACK+DECKER Service
Centre in order to avoid a hazard.
Extension cables & Class 1
product
A 3-core cable must be used as your
u
appliance is earthed and of Class 1
construction.
Always use an approved extension
u
cable suitable for the power input of
this appliance (see technical data). Up
to 30m of 1.50mm
can be used without loss of product
performance.
Before use, inspect the extension
cable for signs of damage, wear and
ageing.
Replace the extension cable if
damaged or defective.
When using a cable reel, always
unwind the cable completely.
Labels on appliance
The following pictograms along with the
date code are shown on the appliance.
CAUTION! Hot Steam
Wash at 60°C. Do not
use bleach or fabric
softener
CAUTION! Hot Surface
extension cable
2