Table of Contents
Advertisement
If the home circuit breaker activates
u
while using the steam function,
discontinue product use immediately
and contact the customer support
centre. (Beware of the risk of electrical
shock.)
The appliance emits very hot steam to
u
clean the area of use. This means
that the steam head, cleaning pads
and attachments get very hot
during use.
Caution! Always wear suitable shoes
when using your steam mop and when
changing the accessories on your steam
mop.
Do not wear slippers or open toed
footwear.
The lid may become hot during use.
u
The surface of the nozzle may become
u
hot during use
Steam may escape from the appliance
u
during use. Care should be taken
when using this appliance. DO NOT
touch any parts which may become
hot during use.
If steam is observed escaping from the
u
body of the steam mop, switch off and
disconnect the unit from the mains
supply, allow to cool.
Contact your nearest authorised repair
agent.
If steam is observed escaping from the
u
pressure relief valve (21), switch unit
off, disconnect the unit from the mains
supply, wait for one hour for the
appliance to cool, and then unscrew.
Check the condition of the seal on the
pressure relief valve.
(Original instructions)
If the seal is in good condition, screw
back on completely to a tight fit.
If steam continues to escape from the
cap contact our nearest authorised
repair centre.
DO NOT CONTINUE TO USE THE
APPLIANCE.
After use
Unplug the appliance and allow to cool
u
before cleaning.
When not in use, the appliance should
u
be stored in a dry place.
Children should not have access to
u
stored appliances.
Residual steam is under pressure in
u
the hose once the unit is switched off.
Please allow the unit to cool before
pressing the trigger
Inspection and repairs
Unplug the appliance and allow to cool
u
before performing any maintenance or
repairs.
Unplug the appliance and allow to
u
cool and check have no steam eject
out by activate the steam trigger on
steam handle (11) before unscrew the
relief valve (21) , can't unscrew the
relief valve until the appliance cooled
and have no steam out. Screw back
on and completely to a tight fit after
maintenance.
Before use, check the appliance for
u
damaged or defective parts.
Check for breakage of parts, damage
to switches and any other conditions
that may affect its operation.
ENGLISH
7
Advertisement
Table of Contents
