4.2 USB main software upgrading with SecureCRT(forced upgrading)
When USB software upgrading fails with Remote control , We can upgrade with debug
serial board Tool and SecureCRT Tool .
Run
SecureCRT.exe
AC power on the TV , at the same time tightly press the "Enter" button on the PC until appear
character
"<<Mstar>>#"
Behind the character"<<Mstar>>#",Write lower-case letter "cu" and press enter key to ensure.
TV will upgrade automatically ,the TV process as same as 4.1.
USB upgrade failing
If USB upgrade failing. At last we can burn the emmc flash program file" *.bin "to the flash IC then
USB disk to upgrade the upgrade_loader.pkg file.
- 15 -