Download
Share
Print this page
SolarEdge SE-DC-SPD-OR Manual
  1. Manuals
  2. Brands
  3. SolarEdge Manuals
  4. Inverter
  5. SE-DC-SPD-OR
  6. Manual
SolarEdge SE-DC-SPD-OR Manual

SolarEdge SE-DC-SPD-OR Manual

Terramax inverter dc spd replacement - support kit
Hide thumbs
1
2
3
4

Advertisement

Quick Links

Download this manual
SolarEdge TerraMax™ inverter DC SPD
replacement - Support kit manual
This manual describes the procedure for replacing the SolarEdge TerraMax 330kW Inverter
DC SPD.
Revision history
Version 1.1, March 2024 – Changed name to TerraMax
Version 1.0, January 2024 – Initial release
Kit contents
SolarEdge TerraMax 330kW Inverter DC SPD kit PN: SE-DC-SPD-OR
Required tools
Torque screwdriver
5mm hex bit
4mm hex bit
Torx T25 bit
Voltmeter
Before you begin
1. Set the P/1/0 switch to "0" (OFF).
2. Turn the DC ON/OFF Switch to the OFF position.
SolarEdge TerraMax Inverter DC SPD replacement
Version 1.1, March 2024
1

Advertisement

loading
Need help?

Need help?

Do you have a question about the SE-DC-SPD-OR and is the answer not in the manual?

Questions and answers

Related Manuals for SolarEdge SE-DC-SPD-OR

Summary of Contents for SolarEdge SE-DC-SPD-OR

  • Page 1 Version 1.1, March 2024 SolarEdge TerraMax™ inverter DC SPD replacement - Support kit manual This manual describes the procedure for replacing the SolarEdge TerraMax 330kW Inverter DC SPD. Revision history Version 1.1, March 2024 – Changed name to TerraMax Version 1.0, January 2024 – Initial release...
  • Page 2 To remove the inverter cover, use a screwdriver with a 5mm hex bit to release the screws holding the cover in place. NOTE The inverter cover assembly is too big for one person to handle safely. SolarEdge recommends that two people remove and handle the cover assembly. Inverter Cover Assembly WARNING! Before doing any maintenance work on the inverter, test for safe AC and DC voltages.
  • Page 3 Be careful not to allow any of the screws to fall into the inverter or onto the floor. 2. Disconnect the connectors connected to the board. 3. Using a 4mm hex bit, remove the four (4) screws holding the DC SPD board in place. SolarEdge TerraMax Inverter DC SPD replacement...
  • Page 4 Turn on the power 1. Unlock the power distribution panel and turn ON the AC circuit breaker. 2. Remove the padlock and turn the DC Switch ON. 3. Set the P/1/0 switch to “1” (ON). SolarEdge TerraMax Inverter DC SPD replacement...