Connection And Pre-Heating - TEFAL RACLETTE Manual

Thank you for purchasing this TEFAL appliance. Whatever your
model, please read the instructions carefully and keep them on hand.
This product
Any commercial use, inappropriate use or failure to comply with the
instructions, the manufacturer accepts no responsibility and the
guarantee will not apply.
Installation
1. Remove any packaging, stickers or accessories
inside and outside the appliance.
2. Dismantle the tray (C), the cooking plate (B)
and the electrical base (A).
3. Remove the wooden spatulas from the base
and unwind the cord completely.
Stretch the three legs out : they must stay in
open position.
4. Turn over and then place the base (A) on the
tray (C). Centre the open legs in the tray notch
which is designed for holding the legs.
5. Place the cooking plate (B) on the base (A): your
appliance is now complete.
6. Place the appliance on the middle of the table,
out of the reach of children.
Place the appliance on a stable, flat, heat-
resistant surface: do not use the appliance
on a soft or unsteady base.
Never place the appliance directly onto a fragile support (glass table,
cloth, varnished furniture...).
The tray will protect your table or your tablecloth from the oil drops falling
from the cooking plate.

Connection and pre-heating

Unwind the cord completely and make sure to remove the wooden
spatulas.
Plug into a wall socket.
Be careful with how you place the cord, so that it does not get in the way of
guests moving around the table.
Check that your electric installation is compatible with the power and
the voltage indicated under the appliance.
Connect the appliance to a socket with an earth connection.
has been designed for domestic
A
B
C
use only.