Installation - Home Decorators Collection KALISPELL BAL-897 Use And Care Manual

Installation

1
Attaching the mounting unit to the
junction box
□ Attach mounting unit (AA) to the junction box (not included)
with mounting screws (BB).
NOTE: The pre-installed support screws on the
mounting unit (AA) should protrude out away
from the junction box.
AA
3
□
over the pre-installed screws on the mounting unit (AA)
and securing it with the washers (EE) and cap nuts (DD).
CAUTION: To avoid any waterproofing problems, please
make sure the light fixture fits the mounting surface
perfectly during installation and use silicone sealant around
the canopy for better sealing after installation.
2
Making the electrical connections
□
mounting unit (AA) by securing it with the preinstalled
ground screw.
□ Connect the black to black (power), the white to white
(neutral) and copper wire to ground wire with the wire
NOTE:
attach the side with markings or letters to the black
(positive) wire and the other to the white (neutral) wire.
BB
5
AA
A
AA
DD
EE
A
HOMEDEPOT.COM/HOMEDECORATORS
Please contact 1-800-986-3460 for further assistance.
CC