Table of Contents
Advertisement
SLEEP TIMER button
The Sleep Timer can turn the TV off for you after you fall
asleep. Program it to work in intervals of 10 minutes, for
a total time of up to 120 minutes.
[
VCR buttons
• To change the sleep timer setting:
Press the SLEEP TIMER button repeatedly until the
display turns to desired time.
• To cancel the sleep time:
Press the SLEEP TIMER button repeatedly until the
display turns to 0.
You can use this remote control to operate the basic
functions of your VCR. These functions include: play,
record, rewind, fast-forward,
stop, pause, channel scan,
TV/VCR,
power on, and power off.
DVD buttons
Move the selector switch to VCR to operate.
• The remote is preset with the code 000 to control
JVC-brand VCR's. For any other manufacturer's
brand
VCR, please see the code chart and instructions on
page 9.
You can also use this remote control to operate the basic
functions of your DVD player. These functions include
play, rewind, fast-forward,
stop, still/pause, previous/
next, tray open/close, power on, and power off.
TV/CATV switch
Move the selector switch to DVD to operate.
• The remote is preset with the code 000 to control
JVC-brand DVD players. For any other manufacturer's
brand DVD player, please see the code chart and
instructions on page 10.
Use either the television's own tuner or a cable box to
select channels. Set this switch to TV to operate the
television's built*in tuner.
VCR/DVD switch
Move the switch to CATV to operate a cable box.
• See page 8 for information on programming
your
remote for cable box operation.
You can control a VCR or DVD player with the buttons
on the lower part of the remote control.
Use the VCR/DVD selector switch to choose either VCR
or DVD operation.
• See pages 9 and 10 for information on programming
your remote with VCR and DVD operating codes.
22
Advertisement
Table of Contents
