Fading Out At The Desired Time - Time Fade - Sony CDP-397 Operating Instructions Manual

Fading Out at the Desired Time — Time Fade AC
You can end the play fading out by designating the play duration. Once the time fade
is set, it functions twice for editing both sides of a tape. You can change discs without
cancelling this function and use it in any play mode.
1 Press the EDIT/TIME FADE button three times in
stop mode, (or press it once in pause mode).
"TIME FADE" and "A" in the tape indicator displayed
in the display.
EDIT/TIME FADE
2 Press the l¢<¢ << or PP PPI to set the desired
play duration.
1ad<< ped)
CT)
Each time you press the I44 44 or PP PPI button,
the play duration for one side of the tape is
displayed as follows.
HALF —C-46 ¢<9C-54 <> C-60
[. (23.00min) (27.00min) (30.00min)
--e—- €)C-90 C-74 econ
(45.00min) (27.00min)
When using the remote commander (only for
CDP-397)
To set the time for one side of the tape as you
want, press the numeric buttons.
Press [10 for "O*.
You need not press buttons for the seconds, unless
required.
24
3 Press the ti (>) button to start playing.
Before the unit enters pause mode at the set time
with "B" illuminated in the tape indicator, play starts
fading out for a specified duration (see page 18).
To start play for the other side of the tape
Press the Pl (> or Wf) button.
The unit enters pause mode at the set time by fading out for
a specified duration.
When this play ends, time fade is cancelled.
To cancel time fade
Press the EDIT/TIME FADE button again.
Time fade is also cancelled when the I44 <4 (<4)or >> PPI
(>) button is kept pressed.
To display the time remaining until the set time
Press the TIME button twice.
When play ends within the designated period
Time fade function is kept active. Change discs and startplay When the total playing time
of the discs reaches the designated period, the unit pauses by fading out.