Table of Contents
Advertisement
Some models have the main terminal
board of the type shown in fig.l.
To gain access to the terminals of the
supply cable, unplug appliance from wall
socket and remove the lid from the
terminal board by releasing the two
catches "A" and "B", with the aid of a
small blade screwdriver (Fig.l).
Location
Place the appliance away from all heat
sources, such as: radiators, heating
stoves, direct sunlight, etc. Best results
are obtained with a room temperature
ranging between +16°C and +32°C (for
''class N" appliances).
Make sure that there is nothing at the
back, at the top and at the bottom of the
appliance to obstruct air circulation.
For a more efficient operation of the
appliance, the minimum distance
between the top of the appliance and
other overhanging kitchen furniture, if
any, should be at least 100 mm (see
Fig. 2A).
However, the best solution would be that
shown in Fig. 2B with no overhanging
furniture.
Two adjustable feet at the cabinet base
make it possible to accurately level the
appliance.
Rear spacers
In the plastic envelope containing the
Operating Instructions are also included
two wall spacers to be fitted into the
special openings provided on the back of
the appliance.
Push-fit the spacers into the openings,
making sure that arrow A is positioned
as per Fig. 3 and then turn them
through 45° until they lock in (arrow in
vertical position).
Before using
Remove all securing tapes. Wash inside
the appliance with lukewarm water and a
little bicarbonate of soda (one teaspoonful
to one quart of water).
Do not use soap or detergent as the smell
might linger and taint food. Dry
thoroughly.
4
fig. 3
Advertisement
Table of Contents
