Removing & Installing Body Components; Battery - Honda Metropolitan NCW50 2018 Owner's Manual

Removing & Installing Body Components

Battery

Positive terminal
Bolt
Battery holder
#
Removal
Make sure the ignition switch is in the OFF
position.
Remove the battery lid.
1.
Remove the battery holder by removing
2.
the bolt.
64
Negative terminal
Battery
P. 65
2
Disconnect the negative - terminal from
3.
the battery.
Disconnect the positive + terminal from
4.
the battery.
Remove the battery taking care not to
5.
drop the terminal nuts.
#
Installation
Install the parts in the reverse order of
removal. Always connect the positive +
terminal first. Make sure that bolts and nuts
are tight.
Make sure the clock information is correct
after the battery is reconnected.
For proper handling of the battery, see
"Maintenance Fundamentals."
"Battery Goes Dead."
P. 22
2
P. 53
2
P. 92
2