Related Manuals for PBZ DT4610AM
Summary of Contents for PBZ DT4610AM
- Page 1 PBZ Assembly Manual Model: DT4610AM Drip Tape Applicator Manufactured by PBZ LLC A Paul B Zimmerman Inc. Company www.CropCareEquipment.com Form DT4610AM Rev. A Date: 5/21...
-
Page 2: Pallet Contents
DT4610 Assembly Instructions Pallet Contents The Drip Tape Applicator comes partially assembled and requires some additional assembly to complete it. Follow the step-by-step instructions to ensure proper assembly. Before assembling, ensure that the pallet contains all of the necessary components and parts. NOTE: Shown as double reel kit, the single reel kit contains half of the components shown and listed (Item 2 is only included in a double reel kit). - Page 3 DT4610 Assembly Instructions Hardware Box Contents These items are inside the hardware box for the Bed Shaper / Plastic Layer unit. NOTE: Shown as double reel kit, the single reel kit contains half of the components shown and listed. Ref# Qty.
- Page 4 DT4610 Assembly Instructions The Drip Tape Applicator can be set up for use based on the following: • Whether there are one or two drip tape lines in the produce bed. • If two drip tape lines are to be installed the setup will need to allow for how far apart the two lines will be spaced. Single Drip Tape Setup (with Drip Tape Roll Unrolling Forward) •...
- Page 5 DT4610 Assembly Instructions Single Drip Tape Setup (with Drip Tape Roll Unrolling to Side) • Install the drip tape reel posts onto the toolbar frame with the reel mounted so that the drip tape will unroll towards one side. • The Drip Tape Guide and the Drip Tape Reel are mounted on different toolbars (the first, second, or third from the front) in this type of setup.
- Page 6 DT4610 Assembly Instructions Dual Drip Tape Setup (with Drip Tape Roll Unrolling Forward) • Install the drip tape reel posts onto the toolbar frame with the reel mounted so that the drip tape will unroll towards one side. • NOTE: The position of the brake arm on each reel should be closest to the rear of the unit as shown. •...
- Page 7 DT4610 Assembly Instructions Dual Drip Tape Setup (with Drip Tape Roll Unrolling to Side) • Install the drip tape reel posts onto the toolbar frame with the reel mounted so that the drip tape will unroll towards one side. This setup allows for narrow drip tape spacing in the produce bed. •...
-
Page 8: Assembly Step
DT4610 Assembly Instructions Assembly Step 1 • After uncrating the unit, remove the drip tape reel post assembly from the toolbar. 1 (2 on opposite side) Ref# Qty. Part # Description DT4610A Drip Tape Applicator, Single Reel Subassembly DT4610B Drip Tape Applicator, Single Reel Subassembly, Opposite Hand FN12 Nut, Flange 1/2-13 RBL150... - Page 9 DT4610 Assembly Instructions Assembly Step 2 • Install the Drip Tape Guide onto toolbar. Set depth (refer to owner’s manual for details). Ref# Qty. Part # Description DTA110 Drip Tape Applicator, Injector, 5in depth DTA101 Drip Tape Applicator, Shank Clamp NC38 Nut, Hex 3/8-16 NC516...
- Page 10 DT4610 Assembly Instructions Assembly Step 3 • Install the Drip Tape Reel onto the toolbar. 1 (or 2 if dual reel setup) Ref# Qty. Part # Description DT4610A Drip Tape Applicator, Single Reel Subassembly DT4610B Drip Tape Applicator, Single Reel Subassembly, Opposite Hand FN12 Nut, Flange 1/2-13 RBL150...
- Page 11 DT4610 Assembly Instructions Assembly Step 4 • Install the Drip Tape Roll Caps onto reels. Ref# Qty. Part # Description DTA112 Drip Tape Applicator, Roll Cap, 21in dia MR14X34 Machine Screw Combo 1/4-20 x 3/4 NNC14 Nut, Lock Nylon 1/4-20...