Table of Contents
Advertisement
TUNER OPERATIONS
Manual tuning
1 Press TUNER/BAND repeatedly to select a band.
The unit switches to the tuner from any other function
and alternates between FM and AM.
Preset tuning
Preset your favourite stations by either of the following ways
("Manualpresetting" or "Automaticpresetting") and tune them
in directly by using preset numbers.
Automatic presetting
Scans the receivable frequency range and stores tuned stations
automatically with the preset number.
1 Press TUNER/BAND.
2 Hold down ECO/RDS for 2 seconds until
"AUTO PRESET" scrolls in the display.
3 Press ECO/RDS on the unti or ENTER on the
If ECO/RDS or ENTER is not pressed within 6 seconds,
automatic presetting is not activated.
The tuning indicator is displayed and scanning begins
with the FM band.
The frequency and the preset number (beginning from 1)
will be displayed when a tuned station is stored.
•Automatic presetting clears all the previously stored preset
and stops at reception.
3 Repeat steps 1 and 2 to preset other stations.
stations have already been stored. ("Full" is displayed.)
• If power is interrupted for more than approximately 12 hours,
all settings stored in memory after purchase need to be reset.
14
Advertisement
Table of Contents
