Table of Contents
Advertisement
Loading door lock
There is a locking system on the loading door of
the machine that prevents opening of the door in
When machine is switched to Pause mode, it
opened.
off, you must cancel the current programme; see
"Canceling the programme".
Changing the selections after
programme has started
To change your settings after the program has
started, you have to switch the machine to Pause
mode first.
C
changing the position of the Programme
or in Pause mode, the programme selected
first will continue. You must cancel the
current programme to change the washing
programme. See "Canceling the programme".
Changing the auxiliary function, speed and
temperature
reached, you can cancel or activate the auxiliary
functions; see, "Auxiliary function selection".
You can also change the speed and temperature
settings; see, "Spin speed selection" and
"Temperature selection".
Adding or taking out laundry
machine to pause mode. Wait until the Loading
C
functions, temperature and speed settings if
start the machine.
Canceling the programme
seconds to cancel the current programme. At the
end of this period, machine can drain the water
inside it or can take in and drain water up to 3
times to cool down the laundry. Washing and End
lights turn on.
starts flashing.
select and start the new programme.
End of programme
light up once the programme comes to an end.
Take out your laundry and close the loading door.
Your machine is ready for the next washing cycle.
13
EN
Advertisement
Table of Contents
