Advertisement
Quick Links
INSTALLATION INSTRUCTIONS
Three Way In-Wall Diverter
Model D35000430
Thank you for selecting DXV. To ensure that your
installation proceeds smoothly, please read these
instructions carefully
before you begin.
RECOMMENDED TOOLS AND MATERIALS
Most of the procedures require the use of common tools and materials, which are available from hardware and plumbing
supply stores. It is essential that the tools and materials be on hand before work has begun.
Channel Locks
ROUGHING-IN DIMENSIONS:
• NOTE: No concealed piping furnished
3-1/8"
(79 mm)
ALL CONNECTIONS 1/2" NPT
In the United States:
DXV
One Centennial Avenue
Piscataway, New Jersey 08855
Attention: Director of Customer Care
For residents of the United States, warranty
information may also be obtained by calling
the following toll free number: (800) 227-2734
www.DXV.com
Product names listed herein are trademarks of AS America, Inc.
© AS America, Inc. 2017
Tubing Cutter
2-9/16"
(65 mm)
FINISHED WALL
2-1/4"
(57mm)
FINISHED WALL
1-5/8"
(41 mm)
In Canada:
DXV
5900 Avebury Road
Mississauga, Ontario
L5R 3M3
Canada
Toll Free: 1-800-387-0369
Local: 905-306-1093
Fax: 1-800-395-1498
www.DXV.ca
Adjustable Wrench
THREE WAY
BODY
- 1 -
Te on Tape
In Mexico:
DXV
Via Morelos 330
Col. Santa Clara Coatitla
Ecatepec, Estado de México 55540
Toll Free: 01-800-8391200
www.DXV.mx
M965504 Rev. 1.3 (5/17)
Advertisement
Related Manuals for LIXIL DXV D35000430
Summary of Contents for LIXIL DXV D35000430
- Page 1 INSTALLATION INSTRUCTIONS Three Way In-Wall Diverter Model D35000430 Thank you for selecting DXV. To ensure that your installation proceeds smoothly, please read these instructions carefully before you begin. RECOMMENDED TOOLS AND MATERIALS Most of the procedures require the use of common tools and materials, which are available from hardware and plumbing supply stores.
- Page 2 ROUGHING-IN DO NOT SEAL ANY OUTLETS. DIVERTER CAUTION CANNOT BE USED AS A STOP VALVE. • Turn off hot and cold water supplies before beginning. • See Roughing-in Drawing on reverse side. The port with the BATH TUB picture is the high flow. •...
- Page 3 SERVICE TO REPLACE O-RINGS: • Turn off water supply. • Unscrew CAP and remove STEM, SPRING and SEALS. • Remove old DIVERTER elements and install new parts. • Replace remaining parts in reverse order. • NOTE: Repair part numbers are 1 thru 9. DISK DISK LOWER...