Connecting To Optional Equipment - Apex Digital AD-1200 Operating Manual

Connecting to Optional Equipment
WARNING
DO NOT set "AUDIO "Digital to PCM/RAW via the SETUP MENU displays, unless connecting to (Via the COAXIAL
jack) a receiver that has the Dolby Digital/DTS decoding functions. Take precaution for high volume sounds may
damage your speakers as well as your hearing.
Enjoying Dolby Pro Logic Surround
Sound Enjoying Digital Stereo Sound
Dolby Pro Logic Surround
Enjoy the dynamic realistic sound of Dolby Pro
Logic Surround by connecting an amplifier and
speaker system (right and left front speakers, a
center speaker, and one or two rear speakers).
To ANALOG
OUT AUDIO OUT 2
Set "AUDIO OUTPUT" to "ANALOG" via the
setup menu.
Digital Stereo
Enjoy the dynamic sound of Digital Stereo by
connecting an amplifier equipped with a digital
audio input and speaker system (right and left
front speakers).
To VIDEO
OUT
To PCM/BITSTREAM
buse Coaxial cable
To digital
audio input
Amplifier equipped
Front |
C
RUE
"TITTEN
Set "AUDIO OUTPUT" to "Digitalout" viathe
setup menu.
IMPORTANT NOTICE
* Refer to the manual of the connected audio receiver.
* Turn off power and unplug both units before connecting.
* Due to the wide dynamic range of sound output of the DVD video player, adjust the volume of your receiver to a comfortable
listening level to avoid speaker damage.
AD-1200