Plug And Fuse Information - Kenwood MultiPro OneTouch FDM73 Instructions Manual

Table of Contents

Advertisement

When drinking through the lid, take care that the drink is smooth. Some experimentation may be necessary
to achieve the desired result, particularly when processing firm or unripened foods as you may find that some
ingredients remain unprocessed.
Do not blend frozen ingredients or ice cubes without liquid.
Never blend dry ingredients (e.g. spices, nuts) or run the Blender empty.
Never fit the blade assembly to the power unit without the bottle fitted.
Mill Attachments Safety
Never fit the blade assembly to the power unit without the jar/lid fitted.
Never unscrew the jar/lid while the mill is fitted to your appliance.
Do not touch the sharp blades – Keep the blade assembly away from children.
Never remove the mill until the blades have completely stopped.
The appliance will not work if the mill is incorrectly fitted.
Do not process hot ingredients in the mill allow to cool down to room temperature before processing.
Mini Chopper/Mill
The processing of spices is not recommended as they may damage the plastic parts.
Grinding Mill
Do not process dried turmeric root as it is too hard and may damage the blades.
Juice extractor
Do not use the juicer if the filter, juicer lid or bowl are damaged or has visible cracks.
The cutting blades on the base of the filter drum are very sharp, take care when handling and cleaning the drum.
Only use the pusher supplied. Never put your fingers in the feed tube. Unplug before unblocking the feed tube.
Before removing the lid, switch off and wait for the filter to stop.
Express Dice/Express Serve Attachment and Discs
The cutting grid and discs are very sharp; handle with care when fitting, removing and cleaning. Always hold
by the finger grip away from the cutting edge when handling the sharp cutting blades, emptying the bowl and
during cleaning.
Never use your fingers to push food down the feed tube. Only use the pusher supplied.
Do not use excessive force to push food down the feed tube – you could damage your attachment.
Before removing the lid, switch off and wait until the disc has completely stopped.
Do not pour hot liquids down the feed tube.
Do not process frozen foods.
Express Serve
Avoid contact with moving parts. Keep fingers out of the food outlet opening.
Do not operate when using the Dicer or Discs without the slinger plate fitted. If the slinger plate is not fitted food
will clog under the plate and not exit the food outlet, resulting in damage to your attachment.
The citrus juicer is not designed to be used with the Express Serve. Always use the citrus juicer with the main
bowl.
Power Consumption
Automatically switches to standby mode after: 12 minutes.
Standby mode: 0.3W.
Before plugging in
Make sure your electricity supply is the same as the one shown on the underside of the power unit.
Important – Plug and Fuse Information
The wires in the cord are coloured as follows:
Blue = Neutral, Brown = Live.
If the plug is cut off it must be DESTROYED IMMEDIATELY. An electric shock hazard may arise if an unwanted non-rewireable plug is
inadvertently inserted into a socket outlet.
If the plug supplied with your appliance has a fuse fitted and the fuse fails it must be replaced with one of the same rating.
Note:
For non-rewireable Plug Type G the fuse cover MUST be refitted when replacing the fuse. If the fuse cover is lost then the plug must
not be used until a replacement can be obtained. The correct fuse cover is identified by colour and a replacement may be obtained
from your Kenwood Authorised Repairer (see Service).
Plug Type G
This appliance conforms to EC Regulation 1935/2004 on materials and articles intended to come into contact with food.
3

Advertisement

Table of Contents
loading

This manual is also suitable for:

Multipro onetouch fdm73.480ss

Table of Contents