Table of Contents
Advertisement
en Before using for the first time
Pull the tab on the glassZone up
2.
and forwards
Set the slider to ON.
3.
Clean under running water.
4.
Place the glassZone in the top
5.
basket and lock in position
Check that the mounts are in the
correct position.
The glassZone audibly clicks into
a
position
.
Push in the top basket.
6.
24
.
.
Before using for the first time
9 Before using for the
first time
Before using for the first time
9.1 Performing the initial con-
figuration
On initial start-up or after a reset to
the factory settings, you will need to
make settings.
Tip: Connect your appliance to a mo-
bile device. You can conveniently
change all settings via the
Home Connect app.
Requirement: The appliance has
been installed and connected.
→ Page 11
Add special salt. → Page 26
1.
Add rinse aid. → Page 27
2.
Switch on the appliance.
3.
→ Page 33
Setting the water softening system.
4.
→ Page 25
Set the amount of rinse aid to be
5.
dispensed. → Page 27
Add detergent → Page 28.
6.
Start the Programme with the
7.
highest cleaning temperature
without tableware.
To remove any marks from water
or other residues, we recommend
you operate the appliance without
tableware before using it for the
first time.
Tip: You can change these settings
and other Basic settings → Page 35
at any time.
Advertisement
Table of Contents
