480 super waterproof beam spot wash 3 in 1 ip65 (31 pages)
Summary of Contents for Hi-ltte 420 LED 3 IN 1 CMY
Page 1
Guangzhou Hi-LTTE Electronics Technology Co.,Ltd USER MANUAL 420 LED 3 IN 1 CMY...
Page 2
Guangzhou Hi-LTTE Electronics Technology Co.,Ltd Foreword Thanks for choosing 420 LED BSW 3IN1 CMY light, it is our newest the latest independent research and development of a high- grade quality. Compared with other same power lights, it's more light weight and convenient, and with perfect combination of international advanced electronic control technology and excellent human chemical.
Guangzhou Hi-LTTE Electronics Technology Co.,Ltd 1. Safety Instructions ◇ Before using this product, please observe carefully the product is not unwrap or damage during transportation. As a result of damage during transporting, please do not use the lights, and contact with the dealer or manufacturer.
Guangzhou Hi-LTTE Electronics Technology Co.,Ltd 4. Packing And Shipping 4.1 Packing Material and Accessories 420W LED is packaged by carton or standard 2-in-1 flight case (Other options are the 1-in-1 flight case and 4-in-1 flight case). Accessories as below. Item...
Guangzhou Hi-LTTE Electronics Technology Co.,Ltd 4.4 Unpacking 1. Open the packing box and packing bag 2. Grab the equipment’s handles, lifting and carrying away the light from the packing box or opening the flight case cover placing lift boom close to the light base, then equipping light hook on light base bottom tightening quick Install locks.
Page 9
Guangzhou Hi-LTTE Electronics Technology Co.,Ltd 5.1 Hook Clamp Installation 420 LED can be placed on the stage or on a stand in any direction, quick lock system can quickly and easily remove or install a light hook. Note: The light is fitted with folding hook, please pull up the folding hook and ensure they’re all in the same direction if use.
Page 10
Guangzhou Hi-LTTE Electronics Technology Co.,Ltd Note: Lights be placed vertically upward, the shortest distance between working lights must be more than or equal 900mm, lighting installation layout as following 5.3 Data cable Data cable is DMX512 signal Caution: Signal line connections is X-type connector...
Guangzhou Hi-LTTE Electronics Technology Co.,Ltd The controller connects to the nearest input XLR 3-pin, then from the output of the device connects to the input of the next device, continuous connection one by one, the final output data cable terminal equipment plug one end into the terminal.
Guangzhou Hi-LTTE Electronics Technology Co.,Ltd 6.2 Power Connection If the external flexible cable or cord of this light is damaged, the line is up to the manufacturer or its service agent or a similar qualified person to replace, in order to avoid danger. Connect the power supply personnel...
Page 13
Guangzhou Hi-LTTE Electronics Technology Co.,Ltd Fixed Gobo Wheel Rotating Gobo Wheel 8.2 Color Wheel & CMY The color wheel is composed of 7 fixed colors of high standard. Users can easily choose the color they like and create a perfect lighting effect. At the same time, it can be used with the gobo wheel.
Page 14
Guangzhou Hi-LTTE Electronics Technology Co.,Ltd 8.3 Optical lens focusing Synchronous work with two high-precision screw motors is used to adjust the optical lens to complete the gobo definition. 8.4 Prism The prism wheel is equipped with an 8-facet prism and a linear prism, which can be rotated clockwise and counterclockwise, and the speed can be adjusted.
Page 17
Guangzhou Hi-LTTE Electronics Technology Co.,Ltd 6、Mixed scene 1、Play scene 2、First round 3、Second round 4、Third round 5、Fourth round 6、Fifth round 7、Sixth round 8、Seventh round 9、Eighth round 7、 Scene editing 1、Scene number 2、Step number 0-29 3、Step editing Time 0-255 Channel 1-25 Value 0-255 4、copy...
Page 18
Guangzhou Hi-LTTE Electronics Technology Co.,Ltd 8、 1 、 F i n e 1、Pan 0…500…-500 2、Tilt 0…500…-500 advanced A d j u s t m e n t 3、Color 0…500…-500 settings (Code 576) 4、CMY1 0…500…-500 5、CMY2 0…500…-500 6、CMY3 0…500…-500 7、Static Gobo 0…500…-500...
Page 19
Guangzhou Hi-LTTE Electronics Technology Co.,Ltd 5、Gobo coordination Yes/No 6、Prism coordination Yes/No 7、Advanced function Yes/No channel 8、speed of the fan full speed /Auto 9、Language 1、Chinese 2、Eng 3、Spanish 10、Turn off No Action Sleep 11、Always show Logo Yes/No ...
Page 20
Guangzhou Hi-LTTE Electronics Technology Co.,Ltd 3、Lamp usage this time(Minute):0 Total (hour) : time 4、Error message Storage Normal/Error Sensor Normal/Error Cpu2-0 communication Normal/Error Bulb filter Yes/No Cpu1 overheat Yes/No Cpu2 overheat Yes/No Hlash Yes/No Yes/No License expired Yes/No Fine Adjustment Backup Consistent...
Guangzhou Hi-LTTE Electronics Technology Co.,Ltd Sound Pan Take off Tilt Take off Set fan power 0-999 Local reset Sub board reset RDM Test Turn off/Turn on Keyboard form Four buttons 10. Channel description Mode/Channel DMX Value description 0-255 Pan Rotation 540°...
Page 22
Guangzhou Hi-LTTE Electronics Technology Co.,Ltd 140-149 Pan、Tilt Reset 150-159 Color System Reset 160-169 Gobo System Reset 180-189 Focus, Zoom, Prism etc. Reset 200-209 All Reset DMX values enter the following range and activate the function immediately 220-229 Auto Mode Strobe/ Shutter...
Page 23
Guangzhou Hi-LTTE Electronics Technology Co.,Ltd 72-79 Green + Dark Blue 80-87 Dark Blue 88-95 Dark Blue + Cyan 96-103 Cyan 104-111 Cyan+3200K 112-119 3200K 120-127 3200K+White 128-190 Forward rainbow effect, from fast to slow 191-192 Stop 193-255 Reverse rainbow effect, from slow to fast...
Page 24
Guangzhou Hi-LTTE Electronics Technology Co.,Ltd 202-227 Positive gobo flow effect: from fast to slow 228-229 No Action 230-255 Reverse gobo flow effect: from slow to fast Rotating gobo wheel Open 6-15 Gobo 1 16-25 Gobo 2 26-35 Gobo 3 36-45...
Guangzhou Hi-LTTE Electronics Technology Co.,Ltd 0-127 360° Rotating index 128-190 Forward prism rotation: from fast to slow 191-192 No Action 193-255 Reverse prism rotation: from slow to fast Prism 2 indexing and rotation 0-127 360° Rotating index 128-190 Forward prism rotation: from fast to slow...
Guangzhou Hi-LTTE Electronics Technology Co.,Ltd 2.If the DMX LED is on and no response to the channel, check the address settings and the DMX controller polarity. 3.Try using another DMX controller. 4.Check to see if the DMX cables run near or run alongside to high voltage cable.
Need help?
Do you have a question about the 420 LED 3 IN 1 CMY and is the answer not in the manual?
Questions and answers