Reading The Capacity Meter; Using The One-Click™ Backup Button - SimpleTech SimpleDrive User Manual

Reading the Capacity Meter

Checking the capacity meter is a quick way to see how much storage space is available on your
SimpleDrive drive. When power is applied to SimpleDrive, the capacity meter illuminates giving
you a visual indication of the amount of available storage on the drive.
The capacity meter contains four sections, which illuminate to indicate the remaining amount of
space on the drive. Each section represents approximately 25 percent of SimpleDrive's total
storage capacity.
When available storage space falls below 10 percent,
the capacity meter flashes red for 10 seconds, and then
goes off. The capacity meter remains off until you press
the One-Click backup button to back up the data on the
drive.
Whenever SimpleDrive is turned on and available
Capacity Meter
storage is below 10 percent, the capacity meter flashes
red for 10 seconds, and then goes off.
Using the One-Click™ Backup Button
With the push of a button, you can instantly back up
selected files and folders on your computer. Just setup
the TotalMedia Backup & Record application to perform
a scheduled backup. Then, simply press the One-Click
button anytime you want to back up your computer's
hard drive.
Using SimpleDrive 5