Connecting External Playback Devices (Aux In Mode); Connecting Headphones - Silvercrest 353496 2007 Operating Instructions And Safety Instructions

Connecting external playback devices (AUX IN mode)

In AUX IN mode, you can connect external playback devices such as a smart-
phone or an MP3 player to use them as the playback source for the radio.
NOTE
► Switch the radio and the external playback device off before connecting
them. Note also the operating instructions for the device that you want to
connect to the radio.
Connect the external playback device to the AUX IN socket
♦
using the supplied AUX cable.
♦ Briefly press the
Briefly press the SOURCE /
♦
AUX IN appears on the display
♦ Turn on the external playback device and start playback.
Afterwards, set the desired volume using the VOLUME |
♦
SCAN dial
the external playback device.
♦ To exit AUX IN mode, turn off the radio and the external playback device.
Remove the AUX cable from the AUX IN socket
Alternatively, you can press the SOURCE /
from AUX IN mode to radio mode or Bluetooth

Connecting headphones

CAUTION
Take care when using headphones.
Listening to music on headphones for long periods and at high volume levels
can lead to hearing damage.
► Always start by setting a low volume and then adjust it to a comfortable
level.
► Always use headphones in such a way that you can still hear ambient
noise.
■ 24 GB │ IE
│
2
button to switch on the radio.
button
1
6
on the radio. Alternatively, you can increase the volume on
3
(several times if necessary) until
.
w
of the radio.
3
button to switch directly
mode.
®
w
of the radio
ENTER /
SRH 5 C3