Eu Declaration Of Conformity - RDL MHC-1F User Manual

DIAGRAMS
5. APPENDIX
5.1 Starting Current
The meter starts to register at 80 mA.
5.2 Wiring Diagram and Mounting Template
The meter must be installed by a competent, qualified electrician to the standards that satisfy the
requirements of the current Institute of Electrical Engineers (IEE).
WIRING DIAGRAM
WALL MOUNTING DIMENSIONS
Visit: www.rdlmeters.com
6
Meter Model:
MHC-1f Single Phase
kWh Credit Meter
This Declaration of Conformity applies
to Meter Serial Number:

EU DECLARATION OF CONFORMITY

RDL Meters Ltd.
Unit E2, Westfield Business Park
Long Road
Paignton
TQ4-7AU
United Kingdom
This declaration of Conformity is issued under the sole responsibility of RDL Meters Ltd.
The fulfilment of the essential requirements set out in Annex I and in the relevant instrument specific
Annexes has been demonstrated.
RDL Meters Ltd declares that the new Measuring Instrument described hereafter as MHC-1f Single
Phase kWh Credit Meter is in conformity with the provisions of EU Measurement Instrument Directive
2014/32/EU.
The object of the declaration is in conformity with the relevant Union harmonized legislation.
BS EN 50470-1:2006 & BS EN 50470-3:2006.
It is identical to the Measuring Instrument which is the subject of EU type examination certificate
number 0120/SGS0280 issued by SGS Fimko Ltd Notified Body No. 0598
Is subject to the procedure set out in Module D of the Directive 2014/32/EU
under the supervision of SGS Fimko Ltd Notified Body No. 0598.
Verified at RDL Meters Ltd, Paignton
Date:
DECLARATION OF CONFORMITY
.................................................................
Peter Gibbs - Technical Director
RDL Meters Ltd
Call: 01803 697 600
7