Table of Contents
Advertisement
Likewise, when you wish to switch from the Advanced OSD menu to the Basic OSD menu,
follow the instructions below:
1. Go to System > Menu Settings > Menu Type and press OK.
2. Press
/
to select Basic. Your projector will switch to the Basic OSD menu.
Securing the projector
Using a security cable lock
The projector has to be installed in a safe place to prevent theft. Otherwise, purchase a lock,
such as the Kensington lock, to secure the projector. You can locate a Kensington lock slot on
the rear side of the projector. See item 19 on
A Kensington security cable lock is usually a combination of key(s) and the lock. Refer to the
lock's documentation for finding out how to use it.
Utilizing the password function
Setting a password
1. Go to the Advanced menu - System > Security Settings. Press OK. The Security Settings
page appears.
2. Highlight Change Password and press OK.
3. The four arrow keys ( ,
represent 4 digits (1, 2, 3, 4). According to the
password you desire to set, press the arrow keys
to enter six digits for the password.
4. Confirm the new password by re-entering the new
password.
5. To activate the Power On Lock function, press
/ to highlight Power On Lock and press /
to select On. Input the password again.
• The digits being input will display as asterisks on-screen. Make a note of your selected password and
keep it in a safe place in advance or right after the password is entered so that it is available to you
should you ever forget it.
• Once a password has been set and the power on lock is activated, the projector cannot be used unless
the correct password is entered every time the projector is started.
If you forget the password
If you enter the wrong password, the password error
message will appear, and the Input Password
message follows. If you absolutely do not remember
the password, you can use the password recall
procedure. See
Entering the password recall
procedure on page
If you enter an incorrect password 5 times in
succession, the projector will automatically shut down
in a short time.
28 Operation
, , ) respectively
29.
page
10.
Return
Input New Password
Password Error
Please try again.
Advertisement
Table of Contents
