Table of Contents
Advertisement
LOADING THE FILM
The camera is designed for use with ISO 100 & 400 DX
encoded films. If DX encoded films are not available, use
IS0100 film. Always load film in the shade. NEVER LOAD
OR UNLOAD FILM IN BRIGHT LIGHT OR DIRECT SUN¬
LIGHT. (Fig. 3)
1. Open the back cover of the camera by pushing the
back cover latch (10) in the direction of the arrow. (Fig.
4
)
2. Insert the bottom part of the film cassette first into
the film chamber (18). (Fig. 5)
3. Pull out the film so as the tip of the film aligns with
the film loading indicator (23). (Fig. 6)
4. Ciose the back cover.
5. With "DX" film, the film speed is automatically set.
6. Open the lens cover by sliding the lens cover slider
(9). Camera will not operate while the lens cover is
closed. (Fig. 7)
7. Depress the shutter button (1) few times until the ex¬
posure counter (2) shows "1". (Rg. 8)
The film transport signal (11) will spin if the film is ad¬
vancing. If it does not spin, reload the film correctly.
(Fig. 9)
SPECIAL NOTE
Use films for color or black-and-white prints only.
Films for color slides are not recommended.
5
Advertisement
Table of Contents
