6Battery Install - µ-Dimension EasyGet User Manual

EasyGet Wifi Handheld Wireless Fiber End Face Inspector
2.3.6 Battery install
Internal connection
Screw hole
Battery cover
Battery connector
Figure 2- 6
Installation method:
1.On the battery cover, use a special screwdriver to loosen the screw to remove the battery cover.
2.In the direction of the figure 2-6 shown, insert the battery connector into the internal connector.
3. The battery tilted a certain angle into the battery slot, not directly into the horizontal level.
4.As figure 2-7, install the battery cover, lock the screws.
Install complete:
Figure 2- 7
12