Related Manuals for µ-Dimension EasyGet
Summary of Contents for µ-Dimension EasyGet
- Page 1 Available on the App Store EasyGet Wifi Available on the App Store EasyGet Wifi Handheld Wireless Fiber End Face Inspector...
- Page 2 Introduction Dear customer： Thank you for choosing EasyGet Wifi MT product. This product has high quality and excellent performance. To make full use of this product, please read this manual carefully before using. Whenever you have any questions, please contact us and we are happy to support.
- Page 3 EasyGet Wifi Handheld Wireless Fiber End Face Inspector Product Warranty Warranty Term We warrants that for a period of one (1) year from the Shipping Date, the product purchased by customer shall be free of defects in material and workmanship under normal authorized use consis- tent with the product instructions.
- Page 4 EasyGet Wifi Handheld Wireless Fiber End Face Inspector Structure Of This Manual Profile This chapter describes the name and function of each part. Hardware basic operation This chapter describes performance characteristics and the basic operation of the equipment. Basic functions of mobile software This chapter introduces software installation, features, interface and basic operation instructions.
-
Page 5: Table Of Contents
EasyGet Wifi Handheld Wireless Fiber End Face Inspector CONTENTS ........................1 PROFILE ..................1.1 CHECK THE PACKAGING ..................1.2 PRODUCT DESCRIPTION ................2 HARDWARE BASIC OPERATION ........................2.1 FEATURES ......................2.2 PERFORMANCE ..................2.3 HARDWARE OPERATION ........................2.3.1 LED light .................... - Page 6 EasyGet Wifi Handheld Wireless Fiber End Face Inspector ....................... 3.3.9 About us ....................3.3.10 User Agreement ....................... 3.3.11 Privacy Policy ..... 3.4MOBILE TERMINAL SOFTWARE OPERATING INSTRUCTIONS ....................22 3.4.1 WIFI connection ....................23 3.4.2 WIFI disconnected ......................24 3.4.3 measuring ......................
-
Page 7: Profile
EasyGet Wifi Handheld Wireless Fiber End Face Inspector 1 Profile 1.1 Check the packaging Check whether include the following parts. We very carefully delivered of each package, such as found missing, Please contact our after-sales staff. According to the packing list of the products, please check whether all items contained, if there are any missing items, please according to provide the way to contact us. - Page 8 EasyGet Wifi Handheld Wireless Fiber End Face Inspector Adapter interface: connect different connector. Focus Ring: Regulating equipment focus clarity. Floodlight LED: Conducive to the operation of various environments. QR code: Scan get app. Label: Indicates important information about the product.
-
Page 9: Hardware Basic Operation
EasyGet Wifi Handheld Wireless Fiber End Face Inspector 2 Hardware basic operation 2.1 Features 1. Varies of adapters meet different requirements on inspect male fiber connector female fiber connector, such as FC SC ST E2000 LC MU and TOSA ROSA fiber end-face. -
Page 10: Hardware Operation
EasyGet Wifi Handheld Wireless Fiber End Face Inspector 2.3 Hardware operation 2.3.1 LED light Battery LED light Power indicator light WIFI LED light Figure 2- 1 LED light Battery LED light status 3 lights flashing USB connection, charging 3 lights are always bright... -
Page 11: Focusing Method
EasyGet Wifi Handheld Wireless Fiber End Face Inspector 2.3.2 Focusing method As shown in the direction of the EasyGetWiFi device, rotate the focus ring clockwise and the connector is away from the fuselage direction; Turn the focal ring counterclockwise and the connec- tor moves in the direction of the fuselage. -
Page 12: Measure
EasyGet Wifi Handheld Wireless Fiber End Face Inspector 2.3.4 Measure The device measuring button will only be used when the device is enabled for WiFi and connected to the mobile device. In USB transmission mode, the measuring button is invalid. -
Page 13: 6Battery Install
EasyGet Wifi Handheld Wireless Fiber End Face Inspector 2.3.6 Battery install Internal connection Screw hole Battery cover Battery connector Figure 2- 6 Installation method: 1.On the battery cover, use a special screwdriver to loosen the screw to remove the battery cover. -
Page 14: 7Replace The Adapter
EasyGet Wifi Handheld Wireless Fiber End Face Inspector NOTE: 1. After removing the battery for the first time, please activate the device. 2. Use a power supply to charge during the shutdown state of the device, and it will take about 2.5 hours to charge. -
Page 15: Basic Functions Of Mobile Software
EasyGet Wifi Handheld Wireless Fiber End Face Inspector 3 Basic functions of mobile software 3.1Software installation and update Mobile device software installation, by scanning the QR code on the fuselage, download it directly on the application platform and install it according to the prompts. - Page 16 EasyGet Wifi Handheld Wireless Fiber End Face Inspector View switch button Set menu button Measurement task ID number ID increases automatically Scan code Image display Camera button Figure 3- 1 Main interface of measurement mode When you use the device screenshot button or the software camera button to save a picture, the main interface displays a thumbnail of the currently taken picture, as shown in the figure below.
- Page 17 EasyGet Wifi Handheld Wireless Fiber End Face Inspector 2.Need to switch the manual detection mode, need to turn off the measurement button in the gener- al settings, the main interface effect is as follows； Set menu button View switch button...
-
Page 18: View Image
EasyGet Wifi Handheld Wireless Fiber End Face Inspector 3.3.2 view image As shown in the figure, click "View Picture" to enter the picture list, the list displays the picture list, the information includes: picture name, shooting time, picture size. Pictures can be deleted and shared. -
Page 19: View Report
EasyGet Wifi Handheld Wireless Fiber End Face Inspector 3.3.4 View report As shown in the figure, click "View Report" to enter the report file list, click the file name and swipe left to delete the file, click the file name to open the report file. -
Page 20: Reset Brightness
EasyGet Wifi Handheld Wireless Fiber End Face Inspector As shown in the figure, click "Brightness Settings", the video interface displays the brightness adjustment progress bar. 3.3.6 Reset brightness Figure 3-9 As shown in the figure, click "Reset Brightness", the video interface displays the default brightness value. -
Page 21: User Manual
EasyGet Wifi Handheld Wireless Fiber End Face Inspector As shown in the figure, click "General Settings" to enter the general settings interface, which contains the following settings: Measurement,closed by default, is the camera mode, when it is turned on, it switches to the measurement mode Photo sound: enabled by default;... -
Page 22: About Us
EasyGet Wifi Handheld Wireless Fiber End Face Inspector 3.3.9 about us Figure 3-12 Click "About Us" to enter the About Us interface, which contains: our company's LOGO, software name (EasyGetWiFi), software version name, our company website and other information. 3.3.10 User Agreement... -
Page 23: Privacy Policy
EasyGet Wifi Handheld Wireless Fiber End Face Inspector Click "User Agreement" to enter the user agreement interface, which contains: EasyGetWiFi service agreement, please read it carefully. 3.3.11Privacy Policy Figure 3- 14 Click "Privacy Policy" to enter the privacy policy interface, which contains: the company's related privacy policy, please read it carefully. -
Page 24: Wifi Disconnected
EasyGet Wifi Handheld Wireless Fiber End Face Inspector Figure 3-15 3.4.2 WIFI disconnected When the WIFI connection is disconnected, enter the software, the main interface prompts "The device is not connected!", and there is a WIFI convenient setting button "Set Wi-Fi" on the main interface of the software. -
Page 25: Measuring
EasyGet Wifi Handheld Wireless Fiber End Face Inspector 3.4.3 measuring The measurement button on the software interface and the measurement button on the body can both trigger measurement. The comparison before and after measurement is as follows: Figure3- 17 3.4.4View zoom... -
Page 26: Photo Sound
EasyGet Wifi Handheld Wireless Fiber End Face Inspector 3.4.5 Photo sound Slide the left side of the screen, enter the side slide bar, click "General Settings", turn on "Photo Sound", there will be a voice prompt when the screenshot is saved. -
Page 27: 8Delete Shared Picture
EasyGet Wifi Handheld Wireless Fiber End Face Inspector Figure 3-21 3.4.8Delete shared picture Enter "View Picture" through the left side sliding bar, long press one of the pictures in the picture list, and then check the batch delete or share, click to enter the single, you need to click the upper right corner option to select delete and share. -
Page 28: 4Basic Functions Of Pc Software In Manual Detection Mode
EasyGet Wifi Handheld Wireless Fiber End Face Inspector Note: All sharing functions need to disconnect the device's WiFi connection, and need to be connected to a normal network to share normally. 4 Basic functions of PC software in manual detection mode 4.1Software Installation... - Page 29 EasyGet Wifi Handheld Wireless Fiber End Face Inspector Figure4-2 Click "Next" to enter the "Component Installation" interface, please check to install, as shown below: Figure4-3...
- Page 30 EasyGet Wifi Handheld Wireless Fiber End Face Inspector Click "Next" to enter the "Read Agreement" interface, please select "Yes I do", as shown below: Figure4-4 Click "Next" to enter the "Shortcut" interface, it is recommended to use the default, as shown below:...
- Page 31 EasyGet Wifi Handheld Wireless Fiber End Face Inspector Click "Next" to enter the "Ready to Install" interface, as shown below: Figure4- 6 Click "Install" to install the software, the software is being installed, as shown below: Figure4-7...
-
Page 32: Software Interface Introduction
EasyGet Wifi Handheld Wireless Fiber End Face Inspector Wait for the software to install successfully, click "Finish" to install successfully, as shown in the figure below: Figure4-8 4.2 PC software interface Double-click the desktop shortcut to enter the software main interface as follows:... - Page 33 EasyGet Wifi Handheld Wireless Fiber End Face Inspector The software is divided into the following five areas: 1.Image display area 2. Edit and control area 3. Display area 4. Function area 5. Help area 4.2.1 Image display area Browse real-time images, as follows: Figure 4-10 4.2.2 Edit and control area...
- Page 34 EasyGet WifI Handheld Wireless Fiber End Face Inspector 4.2.3 Display area Sort by serial number, showing the name and size of the history save picture. Figure 4-12 4.2.4 Function area Figure 4-13 Save Path: Click to enter the folder under the current image save path.
-
Page 35: Software Operation Instructions
EasyGet Wifi Handheld Wireless Fiber End Face Inspector User Manual: Provide product and software details. About: Display product name and version number. 4.3 PC software operation 4.3.1 USB connect Turn off the WIFI switch and the device is connected to the PC via USB. As shown below, select the connection "USB", click "Connect". -
Page 36: 5Basic Functions Of Pc Software In Automatic Measurement Mode
EasyGet Wifi Handheld Wireless Fiber End Face Inspector Figure 4-18 4.3.4 Capture USB connection,only the interface "Capture" button, you can take pictures and save the picture. WIFI connection, the screenshots button and interface "Capture" button can take pictures and save the picture. - Page 37 EasyGet Wifi Handheld Wireless Fiber End Face Inspector Click "Next" to enter the "Select Installation Folder" interface, you can "Browse" to select a custom installation directory, or you can keep the default installation path, as shown below: Figure 5-2 Click "Next" to enter the "Ready to Install" interface, as shown below:...
- Page 38 EasyGet Wifi Handheld Wireless Fiber End Face Inspector Click "Install" to install the software, the software is being installed, as shown below: Figure 5-4 Wait for the software to install successfully, click "Finish" to install successfully, as shown in the...
-
Page 39: Software Interface Introduction
EasyGet Wifi Handheld Wireless Fiber End Face Inspector 5.1.3 Introduction to software features 1. The software adopts WPF architecture: it can adapt to various resolutions and adjust the layout size; 2. Automatic device search and connection function: just plug the charging port of EasyGetWiFi into the computer using the data cable to automatically find the corresponding end detector;... - Page 40 EasyGet Wifi Handheld Wireless Fiber End Face Inspector note: 1. The software opening process needs to wait 2 seconds 2. There is an initialization interface prompt during software opening The main interface of the software is divided into 6 parts. The above figure is represented by numerical values.
- Page 41 EasyGet Wifi Handheld Wireless Fiber End Face Inspector 5.2.2Test task setting area Figure5-8 Measurement task setting area Measurement task: Use the drop-down box to select the criterion of test judgment, the name of the test task will be added to the saved file, and the corresponding name in the file is "Test Task".
- Page 42 EasyGet Wifi Handheld Wireless Fiber End Face Inspector 5.2.3Test result area Figure5-9 Test result area Measurement result: display the area diameter and spot set in the current measurement standard in the form of a table. The background of the test result is black, the font color is green when the test is passed, and red when the test fails.
- Page 43 EasyGet Wifi Handheld Wireless Fiber End Face Inspector Figure5-11 Status display area Green progress bar: the current state will be prompted when the test is in progress or ends. Mask: After ticking the check box, after each measurement, the A, B, and D areas in the task setting will be marked with a circle, and the spots in the recognized fiber image will be marked with different colors.
- Page 44 EasyGet Wifi Handheld Wireless Fiber End Face Inspector Figure5-13 Measurement task selection area The default interface type is Normal. After changing the corresponding interface of the device, you can choose according to the actual situation: Figure5-14 Interface category selection area...
- Page 45 EasyGet Wifi Handheld Wireless Fiber End Face Inspector 5.2.8 System settings Make route settings, analysis settings, company settings and help settings. 【Enter key】Save the current operation result and exit. 【Cancel key】Exit. Path setting Figure5-15 Path setting Save path: The default path is under the installation path "..."...
- Page 46 EasyGet Wifi Handheld Wireless Fiber End Face Inspector Spot A area sensitivity: the setting range is 1-10, corresponding to the A area in the task setting Spot B area sensitivity: the setting range is 1-10, which corresponds to the B area in the task setting...
-
Page 47: Software Operation Instructions
EasyGet Wifi Handheld Wireless Fiber End Face Inspector Version : Display the latest version number of the current software. Help Info: Click to open the PDF manual of the product. Factory Data reset: Click to restore factory settings, close the software, and open the software again to restore the initial interface. - Page 48 EasyGet Wifi Handheld Wireless Fiber End Face Inspector Figure5- 20Main interface 5.3.3View switch Click "View Switch" on the interface to view the original picture and compare it with the measure- ment result picture as shown in the figure： Before view switchingAfter the view is switched 5.3.4measuring...
- Page 49 EasyGet Wifi Handheld Wireless Fiber End Face Inspector Figure5-21 Measurement result area 5.3.5View spot information When the measurement result image is displayed, click the spot, you can see the size of the clicked spot, as shown in the figure: Figure5-22View spot information 5.3.6Stored data view...
- Page 50 EasyGet Wifi Handheld Wireless Fiber End Face Inspector Figure5- 23 Pure data file report format Report format, the template is as follows: Figure5- 24Report file...
- Page 51 EasyGet Wifi Handheld Wireless Fiber End Face Inspector 5.3.7 Lock Encryption lock installed in the device is the key to open the EasyGetWiFi software, when date of encryption lock expired, software will pop up dialog box as shown in figure below.
-
Page 52: Contact Us
EasyGet Wifi Handheld Wireless Fiber End Face Inspector Contact us If you have any further problem, please contact Dimension Technology Co., Ltd Tel:+86 755-26480850 Fax:+86 755-26480895-0 E-mail: Sales consultant: sales@dimension-tech.com After-sales service: servers@dimension-tech.com Technical support: support@dimension-tech.com Web Url:www.dimension-tech.com Address: 3F,Minlida industrial park , Hong hua ling industrial zone, Liuxian Blvd, Xilitown,Nanshan district,...