EASYGET Portable Fiber End-face Visual Inspector Introduction Dear customer: Respect of customer, thank you choose to use EASYGET products. EASYGET product has high quality and good performance. To make full use of this product, please read this manual carefully before using. Whenever you have any questions, please contact us and we are happy to provide...
EASYGET Portable Fiber End-face Visual Inspector Product warranty Warranty period Within 1 year from the date of purchase. The content of the warranty During the warranty period, if the fault caused by the responsibility of the company, the company will be free of charge for repair or parts replacement.
EASYGET Portable Fiber End-face Visual Inspector Structure of this manual This chapter describes the name and function of each part. Profile This chapter describes the installation of the equipmentand Equipment the connection. installation Hardware This chapter describes performance characteristics and the basic basic operation of the equipment.
EASYGET Portable Fiber End-face Visual Inspector 1 Profile 1.1 Check the packaging Check whether include the following parts. Dimension very carefully delivered of each package, such as found missing, Please contact our after-sales staff. 1.1.1 Device 1.1.2 Attachment According to the packing list of the products, please check whether all items contained, if there are any missing items, please according to provide the way to contact us.
EASYGET Portable Fiber End-face Visual Inspector 1.2.4 Interface Five kinds of standard interface: 1. SC/UPC:Used to detect SC adapter or module. 2. LC/UPC:Used to detect LC adapter or module. 3. FC/UPC:Used to detect FC adapter or module. 4. UPC1.25mm:Used to connect UPC1.25 connector.
2 Equipment installation 2.1 Interface to install In order to be able to make EASYGET measurement of various products, we currently have many different adapter interface, in the process of use, you can accord to different need to replace the corresponding adapter interface.
EASYGET Portable Fiber End-face Visual Inspector 3 Hardware basic operation 3.1 Features 1. Taking use of 220k pixel of TFT high-definition LCD, which magnify about 400 times of object, it makes you easier to judge the status of fiber end-face.
EASYGET Portable Fiber End-face Visual Inspector 3.3 Hardware operation 3.3.1 Handheld Type User Guide Steps: 1. Connect microscope to monitor as shown on picture. 2. Choose suitable adapter turn power on. 3. Connect microscope to objective to be inspected. NOTE: If you want to inspect different objective, just change to relative adaptor.
EASYGET Portable Fiber End-face Visual Inspector 3.3.3 Connect to Laptop Please follow the instructions in the disk to connect acquisition card with computers. 3.3.4 Device charging method With 12V rechargeable battery, after full recharge it will work over 8 hours continuously.