Replacing The Lamp; Lamp Unit - Sharp Notevision XR-32X-L Operation Manual

Lamp (Continued)
4 the lamp unit.
Femove
Loosen the securing screws from the
lamp unit, Hold the lamp unit and pull it
in the direction of the arrow. At this time,
keep the lamp unit horizontal and do not
L_%_,i, tilt k.
5 the new lamp unit.
Insert
Press the lamp unit firmly into the lamp
t, unit compartment. Fasten the securing
_;%,S"* screws.
Replace the lamp unit cover.
• Align the tab on the lamp unit cover
(_) and place it while pressing the tab
(.2) to close it. Then tighten the user ser-
vice screw (,3",) to secure the lamp unit
cover,
Info
If the lamp unit and lamp unit cover are
not correctly installed, the power will not
turn on, even if the power cord is con-
nected to the projector,
%
®
Resetting the Lamp Timer
Reset the lamp timer after replacing the lamp.
J
@ ../
tiil! Connect the power cord.
Plug the power cord into the AC socket
_,,_,,,,>,, of the projector.
Reset the
lamp
timer.
• While simultaneously holding down
MENU/HELP, ENTER and T on the pro-
jector, press STANDBY/ON on the pro-
jector.
• "LAMP 0000H" is displayed, indicating
that the lamp timer is reset.
PowE_(b I
j_ ECO+QUIET
STANDBY/ON
button
ENTER button
T button
MENU/HELP
button
54