Functional Description; Special Product Features - Metabo KHA 24 Operating Instructions Manual

ence, and pass on your power tool only together
with this documentation.
For your own protection and for the
protection of your power tool pay
attention to all parts of the text that are
marked with this symbol!
Always wear protective goggles, gloves, a dust
mask and sturdy shoes when working with this
tool.
Ensure that the spot where you wish to work is
free of power cables, gas lines or water pipes
(e.g. using a metal detector).
Hold the power tool only at insulated housing
parts if there is any danger of making contact
with concealed electric cables or the supply
cable. Contact with live wires energises the metal
parts of the housing and can cause electric shock
to the operator.
Do not touch the rotating tool!
Remove chips and similar material only with the
machine at standstill.
Caution must be exercised when driving screws
into hard materials (driving screws with metric or
imperial threads into steel)! The screw head may
break or a high reverse torque may build up on
the handle.
Always hold the machine with both hands using
the handles provided, stand securely and
concentrate.
Work only with the additional handle correctly
installed.
A damaged or cracked additional handle must be
replaced. Never operate a machine with a defec-
tive additional handle.
Protect battery packs from water and moisture!
Never use faulty or deformed battery packs!
Do not expose battery packs to naked flame!
Do not open battery packs!
Do not touch or short-circuit battery packs!
A caustic fluid may leak from defective
NiCd battery packs (30% caustic potash
solution)!
Slightly acidic, flammable fluid may leak
from defective Li-ion battery packs!
If battery fluid from NiCd or Li-ion battery packs
leaks out and comes into contact with the skin,
rinse the affected area thoroughly with water. If
battery fluid leaks out and comes into contact
with your eyes, wash them with clean water and
seek medical treatment immediately!
SYMBOLS ON THE TOOL
V volts
direct current
n no load speed
0
../min revolutions per minute

4 Functional Description

See page 3.
KHA 24:
1 Depth stop
2 Tool lock
3 Additional handle
4 Switch button
5 Lock
6 Battery pack LED (unlocked / locked)
7 Machine LED
(switched on / off; overload indicator)
8 Receiver (for CODE! Key)
9 Rotation selector switch (direction of
rotation setting, transporting safety
device)
10 Trigger switch
11 Capacity and signal display
(only for Li-ion battery pack) *
12 Button for capacity and signal display
(only for Li-ion battery pack) *
13 2 battery-pack release buttons
14 Battery pack
CODE! Key *:
15 Button for closing (CODE! Key) *
16 Button for opening (CODE! Key) *
17 Transmitter (CODE! Key) *
18 Battery status display (CODE! Key) *
19 Code wheels (inside the CODE! Key) *
* not in scope of delivery.

5 Special Product Features

• Optimised centre of gravity
• Aluminium cast gear housing for optimised
heat dissipation and stability
• Impact stop for non-impact drilling (e.g. in tiles,
metal, wood) and for screwdriving
• Rotary stop for chiselling
• Right-left rotation
• Metabo CODE! System: Electronic anti-theft
protection for the machine and battery packs;
can be activated by CODE! Key as an option
(accessories)
ENGLISH
ENG
7