A
1) With a screwdriver, makes lever on the points
....
3) in order to permit the plastic tooth, on the
plinth, to come out from the site
1
5) For the assemblage of the plinth, follow the
order on the picture.
19 590 1670 02
Plinth dismount
2.
2
2) ... indicated, with a movement from the bottom
to the upper ...
2
4) After the described operation on both sides,
proceed with the plinth dismount following the
order in picture.
6) Finish the operation with a light pressare on
the points in picture. The "click" sound will
indicate that the plinth is assembled.
1
2
1
3
3