Subscribe to Our Youtube Channel
Related Manuals for Sicor SH190
Summary of Contents for Sicor SH190
- Page 1 OPERATION AND MAINTENANCE MANUAL SH190 COD.: MUM0207 REV. 03 SICOR S.R.L. Head Office and Production Centre Viale Caproni 32 (Industrial Area) 38068 Rovereto (TN) Italy...
-
Page 2: Table Of Contents
SH190 INDICE LETTER PROVIDED TO THE CUSTOMER ON DELIVERY ..........2 MACHINE IDENTIFICATION ..................3 WARRANTY ......................4 GENERAL DELIVERY NOTES ..................5 SAFETY PRECAUTIONS ..................... 6 SAFETY REQUIREMENTS ..................7 TECHNICAL FEATURES ..................... TRANSPORTATION ....................NOTES FOR INSTALLATION ............................... -
Page 3: Letter Provided To The Customer On Delivery
SH190 LETTER PROVIDED TO THE CUSTOMER ON DELIVERY Dear Customer, SICOR S.R.L. -
Page 4: Machine Identification
SH190 MACHINE IDENTIFICATION... -
Page 5: Warranty
SH190 WARRANTY • free of charge. • • • •... -
Page 6: General Delivery Notes
SH190 GENERAL DELIVERY NOTES Machine data sheet work order... -
Page 7: Safety Precautions
SH190 SAFETY PRECAUTIONS WHEN THESE WARNINGS APPEAR, PROCEED WITH THE UTMOST CAUTION. -
Page 8: Safety Requirements
SH190 SAFETY REQUIREMENTS CAUTION LIFT MACHINERY HAZARD ACCESS FORBIDDEN UNAUTHORISED PERSONS dangers associated with the machine and must have read and LIFTING... - Page 9 SH190 ISOLATION OF POWER SOURCES WARNING is out of service. CAUTION...
- Page 10 SH190 intended.
-
Page 11: Technical Features
SH190 TECHNICAL FEATURES... -
Page 12: Transportation
SH190 TRANSPORTATION WARNING IMPACT AND ABRASION WARNING... - Page 13 SH190 CAUTION order.
- Page 14 SH190 WARNING...
-
Page 15: Notes For Installation
SH190 NOTES FOR INSTALLATION WARNING 40°c 5°c... - Page 16 SH190 ENCODER INSTALLATION INSTRUCTIONS in the diagram.
- Page 17 SH190 9.2. BREATHER PLUG POSITIONING...
- Page 18 SH190 WINCH LUBRICATION CHANGING THE OIL down.
- Page 19 SH190 age to the machine cause serious damage to the machine.
- Page 20 SH190 ELECTRICAL CONNECTIONS IMPORTANT NOTE Any thermistors on the motor MUST BE CONNECTED TO A SPECIFIC RELAY ONLY. 2 AUXILIARIES...
- Page 21 SH190 ELECTRICAL WIRING DIAGRAM Thermocontacts Thermistors Thermistors Thermocontacts Thermistors Thermistors Thermocontacts Thermistor resistance...
- Page 22 SH190 Thermocontacts Thermistors Thermistors Thermocontacts Thermistors Thermistors Thermocontacts Thermistor resistance...
- Page 23 SH190 Thermocontacts Thermistors 1V1 1U1 Thermistors Thermocontacts Thermistors Thermistors Thermocontacts Thermistor resistance...
- Page 24 SH190 Thermocontacts Thermistors 1V1 1U1 Thermistors Thermocontacts Thermistors Thermistors Thermocontacts Thermistor resistance...
- Page 25 SH190 STARTING THE WINCH WARNING...
- Page 26 SH190 IMPORTANT NEVER USE THE WINCH FOR TO CARRY OUT OPERATIONS THAT REQUIRE PERFORMANCE LEVELS ABOVE THOSE INDICATED IN THE TECHNICAL CATALOGUE. DISPOSAL OF THE WINCH AT THE END OF ITS SERVICE LIFE...
- Page 27 SH190 MAINTENANCE CAUTION...
- Page 28 SH190 POS 2 POS 2...
- Page 29 SH190 This brake must be capable of stopping by itself the machinery with cab travelling downhill at a nominal speed and with a loading of the parachute safety device or by impact on the shock absorbers. travels downhill at a nominal speed with a load equal to the nominal...
- Page 30 SH190 POS 2 POS 2 Machine 0.44 0.44...
- Page 31 SH190 COMPULSORY MAINTENANCE OPERATIONS Check 6 months 6 months 6 months 6 months 6 months...
- Page 32 SH190 2. Put the counterweight on 4. Turn the resistance...
- Page 33 SH190 9. If Warning Distance Limit measured Model measured on the on the SH190...
- Page 34 SH190...
- Page 35 SH190 Model Distance A 0,8 mm SH190...
- Page 36 SH190 EMERGENCY MANUAL MANOEUVRES WARNINGS if necessary. • • • • • • • INSTRUCTIONS FOR AN EMERGENCY MANUAL MANOEUVRE • • • •...
- Page 37 SH190 • manoeuvres easier. POS 2 the contact surface uniform • ment manoeuvre. • • • • • • •...
- Page 38 SICOR S.R.L. Head Office and Production Centre Viale Caproni 32 (Industrial Area) 38068 Rovereto (TN) Italy...
Need help?
Do you have a question about the SH190 and is the answer not in the manual?
Questions and answers