Subscribe to Our Youtube Channel
Related Manuals for Sicor SH190
Summary of Contents for Sicor SH190
- Page 1 OPERATION AND MAINTENANCE MANUAL SH190 COD.: MUM0207 REV. 02 SICOR S.p.A. Head Office and Production Centre Viale Caproni 32 (Industrial Area) 38068 Rovereto (TN) Italy...
-
Page 3: Table Of Contents
SH190 INDEX LETTER PROVIDED TO THE CUSTOMER ON DELIVERY ..........2 MACHINE IDENTIFICATION ..................3 WARRANTY ......................4 GENERAL DELIVERY NOTES ..................5 SAFETY PRECAUTIONS ..................... 6 SAFETY REQUIREMENTS ..................7 TECHNICAL FEATURES ..................... TRANSPORTATION ....................NOTES FOR INSTALLATION ............................... -
Page 4: Letter Provided To The Customer On Delivery
SH190 LETTER PROVIDED TO THE CUSTOMER ON DELIVERY Dear Customer,... -
Page 5: Machine Identification
SH190 MACHINE IDENTIFICATION... -
Page 6: Warranty
SH190 WARRANTY • free of charge. • • • •... -
Page 7: General Delivery Notes
SH190 GENERAL DELIVERY NOTES necessary). Machine data sheet work order... -
Page 8: Safety Precautions
SH190 SAFETY PRECAUTIONS WHEN THESE WARNINGS APPEAR, PROCEED WITH THE UTMOST CAUTION. -
Page 9: Safety Requirements
SH190 SAFETY REQUIREMENTS CAUTION LIFT MACHINERY HAZARD ACCESS FORBIDDEN UNAUTHORISED PERSONS dangers associated with the machine and must have read and LIFTING... - Page 10 SH190 ISOLATION OF POWER SOURCES WARNING is out of service. CAUTION...
- Page 11 SH190 intended. rings, etc...).
-
Page 12: Technical Features
SH190 TECHNICAL FEATURES... -
Page 13: Transportation
SH190 TRANSPORTATION WARNING IMPACT AND ABRASION WARNING... - Page 14 SH190 CAUTION order.
- Page 15 SH190 WARNING...
-
Page 16: Notes For Installation
SH190 NOTES FOR INSTALLATION WARNING machine). 40°c 5°c... - Page 17 SH190 ENCODER INSTALLATION INSTRUCTIONS in the diagram.
- Page 18 SH190 9.2. BREATHER PLUG POSITIONING (CODE:TAP0025)
- Page 19 SH190 WINCH LUBRICATION CHANGING THE OIL down.
- Page 20 SH190 age to the machine cause serious damage to the machine.
- Page 21 SH190 ELECTRICAL CONNECTIONS IMPORTANT NOTE Any thermistors on the motor MUST BE CONNECTED TO A SPECIFIC RELAY ONLY. 2 AUXILIARIES...
- Page 22 SH190 ELECTRICAL WIRING DIAGRAM Thermocontacts Thermistors Thermistors Thermocontacts Thermistors Thermistors Thermocontacts Thermistor resistance (VALUE FOR SENSOR)
- Page 23 SH190 Thermocontacts Thermistors Thermistors Thermocontacts Thermistors Thermistors Thermocontacts Thermistor resistance (VALUE FOR SENSOR)
- Page 24 SH190 Thermocontacts Thermistors 1V1 1U1 Thermistors Thermocontacts Thermistors Thermistors Thermocontacts Thermistor resistance (VALUE FOR SENSOR)
- Page 25 SH190 Thermocontacts Thermistors 1V1 1U1 Thermistors Thermocontacts Thermistors Thermistors Thermocontacts Thermistor resistance (VALUE FOR SENSOR)
- Page 26 SH190 STARTING THE WINCH WARNING...
- Page 27 SH190 IMPORTANT NEVER USE THE WINCH FOR TO CARRY OUT OPERATIONS THAT REQUIRE PERFORMANCE LEVELS ABOVE THOSE INDICATED IN THE TECHNICAL CATALOGUE.
- Page 28 SH190 MAINTENANCE CAUTION...
- Page 29 SH190 POS 2 POS 2...
- Page 30 SH190...
- Page 31 SH190 POS 2 POS 2 Machine (minimum) 0.44 0.44...
- Page 32 SH190 COMPULSORY MAINTENANCE OPERATIONS Check 6 months 6 months check * 6 months 6 months 6 months backlash R.R. 0,89 0,93...
- Page 33 SH190 EMERGENCY MANUAL MANOEUVRES WARNINGS if necessary. • • • • • • • INSTRUCTIONS FOR AN EMERGENCY MANUAL MANOEUVRE • • • •...
- Page 34 SH190 • manoeuvres easier. POS 2 the contact surface uniform • manoeuvre. • • • • • • •...
- Page 36 SICOR S.p.A. Head Office and Production Centre Viale Caproni 32 (Industrial Area) 38068 Rovereto (TN) Italy...
Need help?
Do you have a question about the SH190 and is the answer not in the manual?
Questions and answers