Other External Components; View Camera - Kenwood KNA-L50 Instruction Manual

Table of Contents

Advertisement

Other External Components

Other External Components

View Camera

NOTE
• If [Rear Camera Interruption] is active the
camera screen is displayed when you shift the
gear to the reverse (R) position.
Ñ
Display the camera screen
1
Touch [
] on any screen.
h Popup menu appears.
h
2
Touch [Camera].
h View camera screen appears.
h
3
Adjust each item as follows.
To erase the caution message, touch the
screen.
Switching the View Camera *
1
Touch to change the front view camera or
dashboard camera and rear view camera.
Camera off
2
Touch to exit the camera screen.
*1 When the front camera or dashboard camera,
and rear camera are connected with this unit.
38
1
2
1
Ñ
Camera Setup
1
Touch [
] on any screen.
h Popup menu appears.
h
2
Touch [SETUP].
h SETUP Menu screen appears.
h
3
Touch [Camera].
h Camera screen appears.
h
4
Set each item as follows.
[Rear Camera Interruption]
[ON]: Displays the picture from the rear view
camera when you shift the gear to the
reverse (R) position.
[OFF ](Default): Select this when no camera is
connected.
[Parking Guidelines]
You can display parking guidelines to enable
easier parking when you shift the gear to the
reverse (R) position.
Default is "ON".
[Guidelines SETUP]
If you select [ON] for [Parking Guidelines],
you can adjust the parking guidelines. See To
adjust the parking guidelines (P.39).
[Front Camera]
[ON]: Select this when the front camera is
connected.
[OFF ](Default): Select this when no camera is
connected.
[Front Camera Interruption] *
[10 sec]/ [15 sec]/ [20 sec]: The front camera
screen is displayed when return the gear
from the reverse (R) position.
[OFF]: Cancel.
*2 If you select [ON] for [Front Camera].
And when Dashboard Camera is not
connected with this unit.
2

Advertisement

Table of Contents
loading

Table of Contents