Table of Contents
Advertisement
Instructions for the installer
5.3 Regulation for natural gas
The hob has been inspected for G20 (2H) natural gas at a pressure
of 20 mbar. To allow the unit to work with this type of gas, perform
the same operations described in paragraph "5.2 Regulation for
LPG", but choose the nozzles and regulate the primary air for
natural gas, as shown in the following table and in paragraph "5.4
Regulation of primary air". After the regulations have been carried
out, restore the seals with sealing wax or equivalent material.
5.4 Regulation of primary air
Referred to distance "X" in mm.
To identify the burners on your hob, refer to the drawings in point
"6.3 Arrangement of burners on hob "
12
Advertisement
Table of Contents
