Advertisement
6. Troubleshooting
The dishwasher is capable of signalling a number of faults through the
simultaneous illumination of several indicator lights, with the following
meanings:
FAULT
E1
E2
E3
E5
E6
If an alarm occurs the appliance interrupts the program in progress and
signals a fault.
•
In case of E1, E2, and E3, the washing program must be set again
to continue.
•
In case of E5 and E6, simply open and close the door to continue
(once the cause of the fault has been illuminated).
User instructions
DESCRIPTION
The dishwasher's anti-flooding system has
been activated (only for models equipped
with the "TOTAL ACQUASTOP" device).
This alarm is triggered in the event of a water
leak in the dishwasher. In such circumstances
the technical service centre must be called.
The dishwasher has drawn too much water
and the safety level device has triggered.
Repeat the wash program. If the problem
persists, contact the customer technical service
centre.
The dishwasher fails to heat the water.
Repeat the wash program. If the problem
persists, contact the customer technical service
centre.
The dishwasher fails to draw water.
Ensure the plumbing connections are in order
and that the water supply tap is open.
The dishwasher fails to drain.
Check that the drain hose is not kinked, the
siphon is not obstructed and the filters are not
clogged.
57
Advertisement
Troubleshooting
