Download Print this page

Advertisement

Quick Links

PACKAGE REMOVAL, PREPARATION FOR MOVEMENT, HEATING TANK FILLING
Models
Max machine net weight (without packaging material)
Max gross weight
Storage Temperature range
The base of the appliance is secured to a pallet for the transport. When moving the appliance around, a forklift truck
must be used. Images used: illustrative purposes only. Refer to the instruction manual for completeness.
Procedure:
Remove straps and the package.
Open the lower door and remove the lower sheet metal bulkhead. Unscrew the screws securing the machine
to the pallet (both in the front and rear area - recommended ratcheting wrenches).
Remove the wooden front board of the pallet to allow the forks to be inserted.
If necessary: act on the feet to increase the space to insert the fork of the forklift.
Using the forklift, place the base and place the machine on the ground.
Position the machine at the installation point, act on the feet to adjust the height and level it carefully.
[Note: The base of the machine is equipped with wheels to facilitate small movements.]
1
3
5
195101116.00
GW6290
2
4
6
Smeg S.p.A. - Instruments Division -
GW6290
350 kg
390 kg
5°C – 40°C
instruments@smeg.it

Advertisement

loading
Need help?

Need help?

Do you have a question about the GW6290 and is the answer not in the manual?

Questions and answers

Summary of Contents for Smeg GW6290

  • Page 1 Position the machine at the installation point, act on the feet to adjust the height and level it carefully. [Note: The base of the machine is equipped with wheels to facilitate small movements.] 195101116.00 Smeg S.p.A. - Instruments Division - instruments@smeg.it...
  • Page 2 (A). Act on the knob of the working thermostat - TLB boiler, and bring the working temperature to 75 °C (B). Close the sheet metal panel. 195101116.00 Smeg S.p.A. - Instruments Division - instruments@smeg.it...