Advertisement
User instructions
•
Do not use table salt as it contains insoluble substances which,
over time, may damage the water softening system.
•
When necessary, refill the regenerating salt container before
starting the washing program. In this way, the excess saline
solution will be immediately removed by the water; the prolonged
presence of salt water inside the tank may lead to corrosion.
Be careful not to confuse the salt and detergent packages; adding
detergent to the salt container will damage the water softening system.
ADJUSTING THE WATER SOFTENING SYSTEM
The dishwasher is equipped with an
device for the user to adjust the water
softening system according to the
hardness of the water supply.
It is inside the plastic ring-nut on the
right-hand
side,
inside
dishwasher, and allows setting at
levels.
WATER HARDNESS TABLE
WATER HARDNESS
German Degrees (°dH)
0 - 4
5 - 9
10 - 22
23 - 29
30 - 35
36 - 41
Contact your local water board for information on the hardness of your
water supply.
the
5
French Degrees (°dF)
0 - 7
Setting N. 1 NO SALT
8 - 15
16 - 37
38 - 50
51 - 60
61 - 70
SETTING
Setting N. 1
Setting N. 2
Setting N. 3
Setting N. 4
Setting N. 5
43
Advertisement
Troubleshooting
