Advertisement
User instructions
TABLE FOR CERTIFICATION BODIES
Reference standard
Reference program
Load
Type of detergent
Amount of detergent
Rinse aid setting
3.2 Washing programs
Before starting a washing program make sure that:
•
The water supply tap is open.
•
The correct amount of detergent has been added to the
dispenser.
•
The baskets have been correctly loaded.
•
The spray arms are able to rotate freely and without
obstruction.
•
The dishwasher door is securely closed.
HALF LOAD WASH SETTING
This function is especially suitable for loads up to 6
place settings and allows saving of water and
electricity.
It is controlled by the HALF LOAD
button (6) and allows washing in the upper basket
only.
IMPORTANT: at the end of the program remember
to deactivate the function to ensure the next
wash is not also carried out in half load mode by
mistake.
EN 50242
BIO
12 place-settings
B
30 g
Depending on the model 3/4 or 4/6
EN 50242
39
Advertisement
Troubleshooting
