Advertisement
Quick Links
APEC ROTL-600 System Filter Change Instruction
Note: This filter should not be used with water that is microbiologically unsafe or of unknown quality without adequate
disinfection before or after the system. Please replace the filter cartridges regularly according to the filter cartridge life
indicator or reminder information.
Filter cartridge replacement steps
1. Turn on the drinking faucet and turn off the supply water to the system. When pure water stops from the drinking
faucet, unplug the power adapter.
2. Unscrew the existing filter cartridge counterclockwise and relieve the pressure.
3. Remove the plastic protection cover at the upper end of the filter cartridge.
Remove horizontally
2
Unscrew the filter cartridge
1
Filter cartridge
Advertisement
Related Manuals for APEC ROTL-600
Summary of Contents for APEC ROTL-600
- Page 1 APEC ROTL-600 System Filter Change Instruction Note: This filter should not be used with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system. Please replace the filter cartridges regularly according to the filter cartridge life indicator or reminder information.
- Page 2 4. Screw the replacement filter cartridge into the system in the clockwise direction Place horizontally Screw the filter cartridge CAUTION Insert the filter cartridge from the front side of the housing. Place the filter cartridge handle at an angle of 90° to the housing.
- Page 3 5 minutes, then turn on the drinking faucet and flush CB filter cartridges for 15 minutes. CAUTION 1. Replace the filter cartridge only with genuine APEC Water filter. 2. The actual filter cartridge life will depend on the local tap water quality and your daily usage.
Need help?
Do you have a question about the ROTL-600 and is the answer not in the manual?
Questions and answers
I can’t seem to figure out how to get the carbon filter out to replace on rotl 600
To remove the carbon filter for replacement on the APEC ROTL-600, follow these steps:
1. Turn on the drinking faucet and turn off the supply water to the system. Wait until pure water stops flowing, then unplug the power adapter.
2. Unscrew the existing filter cartridge counterclockwise to relieve pressure.
3. Remove the filter cartridge horizontally from the system.
This process ensures safe removal of the filter before replacing it with a new one.
This answer is automatically generated