Before Calling For Service - LG DLHC1455W.BBWEEUS Owner's Manual

Before Calling for Service

The dryer is equipped with an automatic error-monitoring system to detect and diagnose problems at an
early stage. If the dryer does not function properly or does not function at all, check the following before
you call for service.
Error Messages
Problem
The door has been opened while the appliance is in operation or the appliance is being
dE
operated without the door being closed properly.
DOOR ERROR
• Close the door completely.
• If
Door switch detection is not working properly.
dE4
• Unplug the power plug and call for service.
DOOR ERROR
Temperature Sensor has malfunctioned.
/
tE1 tEz
• Unplug the power plug and call for service.
TEMPERATURE
ERROR
The temperature inside the drum has risen suddenly.
FI
• Unplug the power plug and call for service.
TEMPERATURE
ERROR
The motor has stopped suddenly.
LE1
• Check if the amount of clothing exceeds the maximum load capacity.
MOTOR LOCKED
ERROR
• Unplug the power plug and call for service.
The compressor has stopped suddenly.
/
LEz AE
• Unplug the power plug and call for service.
COMPRESSOR ERROR
The drain pump motor has malfunctioned.
OE
• Unplug the power plug and call for service.
DRAIN PUMP ERROR
The temperature at the installation location is below zero.
• The recommended surrounding temperature for installation is 41 - 95 ℉ (5 - 35 ℃).
Power cord is connected incorrectly.
Ps
• Check the connection of the power cord to the terminal block.
POWER SUPPLY
ERROR
Operation
Problem
The appliance will Power cord is not properly plugged in.
not turn on.
• Make sure that the power plug is securely plugged into a grounded outlet matching the
House fuse is blown, circuit breaker has tripped, or power outage has occurred.
• Reset circuit breaker or replace fuse. Do not increase fuse capacity. If the problem is a
The appliance does House fuse is blown, circuit breaker has tripped, or power outage has occurred.
not heat.
• Reset circuit breaker or replace fuse. Do not increase fuse capacity. If the problem is a
recurs, call for service.
dE
appliance's rating plate.
circuit overload, have it corrected by a qualified electrician.
circuit overload, have it corrected by a qualified electrician.
Possible Cause & Solution
Possible Cause & Solution
TROUBLESHOOTING 45