Table of Contents
Advertisement
38 MAINTENANCE
MAINTENANCE
WARNING
• Unplug the appliance before cleaning.
• Never use harsh chemicals, abrasive cleaners, or solvents to clean the appliance. They will damage the
finish.
Regular Cleaning
Cleaning the Lint Filter
CAUTION
• Refer to the following instructions for proper
cleaning of the lint filter. Failure to do so can
cause lint buildup on the condenser that can
affect the drying performance.
NOTE
• Cleaning the lint filter will reduce drying time
and energy consumption and prevent
unnecessary malfunctions.
• Unload all of the clothes from the appliance
before pulling out the lint filter.
• After cleaning the 2-piece lint filter, insert it back
into place. The appliance will not operate
without the lint filter in place.
Inner Filter
a
• Always clean the inner filter before and after
use.
Outer Filter
b
• Clean the outer filter after drying 10 times or
when the lint has accumulated on the outer
filter.
• A chime will sound after every 10 drying
cycles and the
K
icon will blink.
Cleaning the Inner Filter
1
Pull out the inner filter from the outer filter
and then open the inner filter.
• Open the filter by unfolding it in the
direction of the arrow.
2
Use your fingers to get most of the lint off the
filter. To clean off residual lint, use a vacuum
cleaner or rinse under running water.
• The filter must be completely dry before
using or it could cause an unpleasant odor.
CAUTION
• Do not tap the filter repeatedly as the built-in
magnet may dislodge and cause a malfunction.
3
After drying the inner filter completely, close
the filter by pushing the center down.
• Ensure the left and right sides of the inner
filter are closed properly.
4
Insert the inner filter into the outer filter.
Advertisement
Table of Contents
