Smeg FP38X Operating Manual page 12

99634242_ML_pyro.qxd 19/11/04
After performing these actions, the oven starts heating.
At the end of the cooking cycle, a series of beeps will sound for a few minutes and the
symbol will start flashing.
You can stop the beeps by pressing on the START/STOP button for 1 second.
You may consult or modify the cooking end time at any moment by pressing on the
button.
To cancel your programme, press the START/STOP button.
P
rogramming your chosen cooking end time
- Perform the above procedure. After setting
cooking time,
- Press the "end cooking"
ing end time is indicated and flashes, as does
the
adjusted.
You have programmed a cooking time of 30 min
The cooking end time indicated is 1 pm (13:00).
- Adjust the cooking end time using the + or - buttons
Once the cooking end time has been programmed, normal time is displayed.
The oven will now start heating up in time for cooking to be finished by 2 pm (14:00).
When cooking is complete, the oven will beep for several minutes. You can stop the oven
from beeping by pressing on the START/STOP button for 1 second.
92
14:30 Page 92
button; the cook-
symbol to indicate that it may be
Example : It is 12:30
Example: Cooking end time: 2 pm (14:00).
You may consult or change the cooking end time at any time by pressing
the .
To cancel your programme, press the START/STOP button.
START
STOP
START
STOP
START
STOP
START
STOP
START
STOP
START
STOP
START
STOP
STAR ST ART
ST STOP OP
STAR ST ART
STOP ST OP
START
STOP