Tools, Supplies And Required Equipment - Traxxas WIDE-MAXX 1/10 ROT RTR TSM SR VXL4S Owner's Manual

For more information on
batteries, see Use the Right
Batteries on page 12.
Recommended Equipment
These items are not required
for the operation of your
model, but are a good idea to
include in any RC toolbox:
• Safety glasses
• Traxxas Ultra Premium Tire
Glue, part #6468 (CA glue)
• Hobby knife
• Side cutters and/or needle
nose pliers
• Soldering iron
6 • MAXX

TOOLS, SUPPLIES AND REQUIRED EQUIPMENT

Your model comes with a set of specialty metric tools. You'll need to purchase other items, available from your hobby dealer, to operate and
maintain your model.
Supplied Tools and Equipment
2.5mm "L" wrench 2.0mm "L" wrench
Required Equipment
(not included)
3s/4s LiPo battery pack with
Traxxas iD® High Current Connector
Traxxas Power Cell LiPo iD® batteries are strongly
recommended for maximum performance and
safer charging
REMOVING AND INSTALLING THE BODY
Your Maxx includes an innovative latching system for securing the
body to the chassis. To remove the body for chassis access:
1. Turn the handle 90 degrees counterclockwise to unlock the
body latch.
2. Open the latch to release the truck body from the rear shock
tower.
3. Gently lift the rear of the body. Do not lift too far or the body will
become difficult to remove.
4. Slide the body backward away from the front shock tower to
release the front body tab. (Installation of the body is the reverse
of removal.)
5. Practice this a few times until you become familiar with the
latching mechanism. The more you do it, the faster you will be.
Universal wrench Battery pack spacers
EZ-Peak Live
®
(part #2971)
Battery charger 4 AA alkaline batteries
*Battery and charger style is subject to change and may vary from images.