Table of Contents
Advertisement
Programmable functions
Activating/Deactivating
The RemoteUpdate function is activated
as standard. Available updates will be
downloaded automatically but will only
be installed if you initiate installation
manually. Deactivate RemoteUpdate if
you do not want any updates to be
downloaded automatically.
Options
= RemoteUpdate is deactivated
= RemoteUpdate is activated
(factory default)
Starting the update
After the washing machine is switched
on, appears on the time display.
Touch the Start/Add laundry sensor
control.
starts to flash on the time display.
The update starts.
Bars on the time display show the pro-
gress of the update:
= 0 %
= 100 %
Postponing the update
After the washing machine is switched
on, appears on the time display.
Touch the sensor control.
The running time of the selected pro-
gramme appears on the time display.
The next time you switch on the wash-
ing machine, you will be prompted to
start the update again.
84
Switching off WiFi
Turn the programme selector to the
MobileStart programme.
appears on the time display.
Press and hold sensor control
until the countdown on the time dis-
play has finished.
appears on the time display.
- The WiFi is switched off.
- The WiFi connection will be reset to
the factory default setting.
The network configuration should be
reset whenever a washing machine is
being disposed of or sold, or if a used
washing machine is being put into
operation. This is the only way to en-
sure that all personal data has been
removed and the previous owner will
no longer be able to access the wash-
ing machine.
A new connection has to be set up in
order to use the Miele@home setting
again.
Advertisement
Table of Contents
