Starting a programme
Touch the flashing Start/Add laundry
sensor control.
The door locks and the programme
starts.
If a Delay start time has been selected,
this counts down on the time display. At
the end of the Delay start time or imme-
diately after the programme has started,
the programme duration appears on the
time display.
Energy savings
After 10 minutes, the indicators dim.
The sensor control Start/Add laundry
flashes.
To reactivate the indicators:
Touch the Start/Add laundry sensor
control (this does not have any effect
on a programme that is running).
6. Starting the programme
Adding laundry during a pro-
gramme sequence (AddLoad)
Laundry can be added or removed at
any time, provided that the symbol
is not illuminated on the control field.
Touch the Start/Add laundry sensor
control.
Rotating bars ... ... are
shown in the time display.
If the word appears on the time dis-
play, the door can be opened.
Open the door and add or remove
laundry.
Close the door.
Touch the Start/Add laundry sensor
control.
The wash programme will continue.
Laundry cannot usually be added or re-
moved if:
- The suds temperature is above 55 °C
- The water inside the drum is above a
certain level
29