Starting The Programme; Adding Laundry During A Programme Sequence (Addload) - Miele WWV 980 WPS Passion Operating Instructions Manual

6. Starting the programme

Starting the programme

The programme can be started when
the Start/Stop sensor control is flashing
on and off.
 Touch the Start/Stop sensor control.
The door will lock and the programme
will start.
The programme status will appear in the
display.
 Status

Time left
Cottons
The washing machine will keep you up-
dated on the programme status and the
time remaining for the programme to
run.
If a delay start period has been selec-
ted, this will count down in the display
until the programme starts.
The drum lighting switches off once the
programme has started.
Energy savings
After 10 minutes, the indicators dim.
The Start/Stop sensor flashes slowly.
To reactivate the indicators:
 Touch the Start/Stop sensor (this
does not have any effect on a pro-
gramme that is running).
40
11:02

2:27 h
Main wash
Add laundry
Adding laundry during a pro-
gramme sequence (AddLoad)
Laundry can be added or removed at
any time.
 Touch the Add laundry sensor control.
The following appears in the display:
 Please wait
The programme will stop and the door
will unlock.
The following appears in the display:
 Status

Add laundry
The door can be opened.
Cottons
 Open the door and add or remove
laundry.
 Close the door.
 Touch the Start/Stop sensor control.
The programme will continue.
Laundry cannot usually be added or re-
moved if:
- The suds temperature is above 55 °C
- The water inside the drum is above a
certain level
11:02
