Table of Contents
Advertisement
Replacing Clock/Remote Battery
The clock and remote batteries are pre-installed. Follow the steps below if replacement
becomes necessary.
WARNING:
Replace battery with Panasonic PART NO. VSBW0004 (CR2025) only. Use of another
battery may present a risk of fire or explosion.
Caution: Battery may explode if mistreated. Dispose of used battery promptly. Keep
away from children. Do not recharge, disassemble or dispose of in fire.
Clock Battery
Tripod Mounting Hole
1
\
1
While pinching 2 tabs, pull Battery
Tray out.
1
2
Bend 1 tab to remove Battery.
(PV-L650 shown)
3
Snap new Battery (® mark down)
:
into Battery Tray.
Underside View
* Do not reverse the polarity.
.
4
®
Insert Battery Tray so the triangle
9
N
marks meet.
Note:
=
* Keep Battery out of children's reach.
3 ot
|
Swallowing it may be harmful.
* improperly installed, discharged, or
missing battery causes "CLOCK
BATTERY" to appear when DISPLAY is
pressed.
* Battery life is approximately 5 years.
Remote Battery (PV-L650 only)
1 € while pressing stopper tab,
B) pull Battery Tray out.
2
Insert battery into tray with
@ mark down.
Do not reverse polarity.
3
Replace Battery Tray.
For assistance, call 1-800-211-PANA(7262)
Advertisement
Table of Contents
