Table of Contents
Advertisement
Connections
Connecting Example 6
To Connect a TV Equipped with Video/Audio Input
Jacks
VHF/UHF IN
If your TV has video/audio input jacks, connect them to
the MONITOR OUT jacks on the VCR to obtain a
higher quality picture.
1
Make connections between an antenna and
VHF/UHF IN on the VCR, and between VHF/UHF
OUT on the VCR and the antenna terminal! on the
TV following examples 1 to 5.
2 Connect MONITOR OUT on the VCR and the video/
audio input jacks on the TV with the supplied
audio/video connecting cable.
18
Connecting Example 7
To Connect an Audio System
RK-G74
(not supplied)
LINE IN
A LINE OUT
1 (or 2)
Audio/video connecting
cable (supplied)
Color monitor
You can enjoy tapes recorded in hi-fi stereo when the VCR
is connected to your audio system.
Notes
lf the VCR is installed near a tuner or a radio, noise
may be heard in AM reception. In this case, move
the VCR away from the tuner or the radio, adjust
the AM antenna for minimum noise, or connect an
external AM antenna to the tuner.
Since a hi-fi recorded tape has a wide dynamic
range, turn down the volume on the amplifier
before playing back the tape to avoid damaging the
speakers.
*Before connecting or disconnecting the power
cord of the VCR, be sure to turn off the connected
amplifier.
Advertisement
Table of Contents
