Table of Contents
Advertisement
BAGGING GRASS CLIPPINGS (Model 979 Only)
This mower can bag grass clippings. Foiiow steps 1 through 3 to ready the mower for bagging.
Step 1. Remove wing nuts holding mulching
baffle or side discharge chute in place. Then
remove plug or discharge chute.
Step 2. Replace with bagging adapter. Attach
using wing nuts. Eie sure that inner lip of
attachment goes under the edge of the deck.
Step 3. Lift chute door and slide bag onto adapter.
Chute Door
i \
NOTE:
The chute door has been
designed to move the starter
rope out of the way of the bag
when the chute door is opened.
Advertisement
Table of Contents
